lkml.org 
[lkml]   [2017]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM64: dts: meson-axg: add ethernet mac controller
Date
Add DT info for the stmmac ethernet MAC which found in
the Amlogic's Meson-AXG SoC, also describe the ethernet
pinctrl & clock information here.

This is tested in the S400 dev board which use a RTL8211F PHY,
and the pins connect to the 'eth_rgmii_y_pins' group.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

---
Changes in v2 since [1]:
- rebase to kevin's v4.16/dt64 branch
- add Neil's Reviewed-by
- move clock info to board.dts instead of in soc.dtsi
- drop "meson-axg-dwmac" compatible string, since we didn't use this
we could re-add it later when we really need.
- note: to make ethernet work properly,it depend on clock & pinctrl[2],
to compile the DTS, the patch [3] is required.
the code part will be taken via clock & pinctrl subsystem tree.

[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005301.html

[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005735.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005694.html

[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005738.html
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 11 ++++++
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 ++++++++++++++++++++++++++
2 files changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 70eca1f8736a..138de3bc7cc8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -20,3 +20,14 @@
&uart_AO {
status = "okay";
};
+
+&ethmac {
+ status = "okay";
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ phy-mode = "rgmii";
+ pinctrl-0 = <&eth_rgmii_y_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index d356ce74ad89..106234fda765 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>

/ {
compatible = "amlogic,meson-axg";
@@ -148,6 +149,15 @@
#address-cells = <0>;
};

+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
hiubus: bus@ff63c000 {
compatible = "simple-bus";
reg = <0x0 0xff63c000 0x0 0x1c00>;
@@ -194,6 +204,46 @@
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 86>;
};
+
+ eth_rgmii_x_pins: eth-x-rgmii {
+ mux {
+ groups = "eth_mdio_x",
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ };
+ };
+
+ eth_rgmii_y_pins: eth-y-rgmii {
+ mux {
+ groups = "eth_mdio_y",
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ };
+ };
};
};

--
2.15.1
\
 
 \ /
  Last update: 2017-12-14 04:03    [W:0.049 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site