lkml.org 
[lkml]   [2017]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/3] soc/fsl/qe: Use common error handling code in ucc_fast_init()
From
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 13 Dec 2017 18:18:56 +0100

Add jump targets so that a bit of exception handling can be better reused
at the end of this function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/soc/fsl/qe/ucc_fast.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c
index 2092bfdcf1bc..268dfc5dc89b 100644
--- a/drivers/soc/fsl/qe/ucc_fast.c
+++ b/drivers/soc/fsl/qe/ucc_fast.c
@@ -269,8 +269,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
__func__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
- ucc_fast_free(uccf);
- return -ENOMEM;
+ goto free_nomem;
}

/* Allocate memory for Rx Virtual Fifo */
@@ -282,8 +281,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
__func__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
- ucc_fast_free(uccf);
- return -ENOMEM;
+ goto free_nomem;
}

/* Set Virtual Fifo registers */
@@ -312,8 +310,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
__func__);
- ucc_fast_free(uccf);
- return -EINVAL;
+ goto free_inval;
}
/* Tx clock routing */
if ((uf_info->tx_clock != QE_CLK_NONE) &&
@@ -321,8 +318,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
__func__);
- ucc_fast_free(uccf);
- return -EINVAL;
+ goto free_inval;
}
} else {
/* tdm Rx clock routing */
@@ -330,8 +326,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->rx_clock,
COMM_DIR_RX)) {
pr_err("%s: illegal value for RX clock", __func__);
- ucc_fast_free(uccf);
- return -EINVAL;
+ goto free_inval;
}

/* tdm Tx clock routing */
@@ -339,8 +334,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->tx_clock,
COMM_DIR_TX)) {
pr_err("%s: illegal value for TX clock", __func__);
- ucc_fast_free(uccf);
- return -EINVAL;
+ goto free_inval;
}

/* tdm Rx sync clock routing */
@@ -348,8 +342,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->rx_sync,
COMM_DIR_RX)) {
pr_err("%s: illegal value for RX clock", __func__);
- ucc_fast_free(uccf);
- return -EINVAL;
+ goto free_inval;
}

/* tdm Tx sync clock routing */
@@ -357,8 +350,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->tx_sync,
COMM_DIR_TX)) {
pr_err("%s: illegal value for TX clock", __func__);
- ucc_fast_free(uccf);
- return -EINVAL;
+ goto free_inval;
}
}

@@ -374,6 +366,14 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc

*uccf_ret = uccf;
return 0;
+
+free_nomem:
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+
+free_inval:
+ ucc_fast_free(uccf);
+ return -EINVAL;
}
EXPORT_SYMBOL(ucc_fast_init);

--
2.15.1
\
 
 \ /
  Last update: 2017-12-13 18:37    [W:0.047 / U:2.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site