lkml.org 
[lkml]   [2017]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver
From
Date
On 15/11/17 11:56, Jacopo Mondi wrote:
> Copy the soc_camera based driver in v4l2 sensor driver directory.
> This commit just copies the original file without modifying it.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/media/i2c/ov772x.c | 1124 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 1124 insertions(+)
> create mode 100644 drivers/media/i2c/ov772x.c
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> new file mode 100644
> index 0000000..8063835
> --- /dev/null
> +++ b/drivers/media/i2c/ov772x.c
> @@ -0,0 +1,1124 @@
> +/*
> + * ov772x Camera Driver
> + *
> + * Copyright (C) 2008 Renesas Solutions Corp.
> + * Kuninori Morimoto <morimoto.kuninori@renesas.com>
> + *
> + * Based on ov7670 and soc_camera_platform driver,
> + *
> + * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
> + * Copyright (C) 2008 Magnus Damm
> + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/v4l2-mediabus.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/i2c/ov772x.h>
> +#include <media/soc_camera.h>
> +#include <media/v4l2-clk.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-image-sizes.h>
> +
> +/*
> + * register offset
> + */
> +#define GAIN 0x00 /* AGC - Gain control gain setting */
> +#define BLUE 0x01 /* AWB - Blue channel gain setting */
> +#define RED 0x02 /* AWB - Red channel gain setting */
> +#define GREEN 0x03 /* AWB - Green channel gain setting */
> +#define COM1 0x04 /* Common control 1 */
> +#define BAVG 0x05 /* U/B Average Level */
> +#define GAVG 0x06 /* Y/Gb Average Level */
> +#define RAVG 0x07 /* V/R Average Level */
> +#define AECH 0x08 /* Exposure Value - AEC MSBs */
> +#define COM2 0x09 /* Common control 2 */
> +#define PID 0x0A /* Product ID Number MSB */
> +#define VER 0x0B /* Product ID Number LSB */
> +#define COM3 0x0C /* Common control 3 */
> +#define COM4 0x0D /* Common control 4 */
> +#define COM5 0x0E /* Common control 5 */
> +#define COM6 0x0F /* Common control 6 */
> +#define AEC 0x10 /* Exposure Value */
> +#define CLKRC 0x11 /* Internal clock */
> +#define COM7 0x12 /* Common control 7 */
> +#define COM8 0x13 /* Common control 8 */
> +#define COM9 0x14 /* Common control 9 */
> +#define COM10 0x15 /* Common control 10 */
> +#define REG16 0x16 /* Register 16 */
> +#define HSTART 0x17 /* Horizontal sensor size */
> +#define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */
> +#define VSTART 0x19 /* Vertical frame (row) start high 8-bit */
> +#define VSIZE 0x1A /* Vertical sensor size */
> +#define PSHFT 0x1B /* Data format - pixel delay select */
> +#define MIDH 0x1C /* Manufacturer ID byte - high */
> +#define MIDL 0x1D /* Manufacturer ID byte - low */
> +#define LAEC 0x1F /* Fine AEC value */
> +#define COM11 0x20 /* Common control 11 */
> +#define BDBASE 0x22 /* Banding filter Minimum AEC value */
> +#define DBSTEP 0x23 /* Banding filter Maximum Setp */
> +#define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */
> +#define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */
> +#define VPT 0x26 /* AGC/AEC Fast mode operating region */
> +#define REG28 0x28 /* Register 28 */
> +#define HOUTSIZE 0x29 /* Horizontal data output size MSBs */
> +#define EXHCH 0x2A /* Dummy pixel insert MSB */
> +#define EXHCL 0x2B /* Dummy pixel insert LSB */
> +#define VOUTSIZE 0x2C /* Vertical data output size MSBs */
> +#define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */
> +#define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */
> +#define YAVE 0x2F /* Y/G Channel Average value */
> +#define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */
> +#define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */
> +#define HREF 0x32 /* Image start and size control */
> +#define DM_LNL 0x33 /* Dummy line low 8 bits */
> +#define DM_LNH 0x34 /* Dummy line high 8 bits */
> +#define ADOFF_B 0x35 /* AD offset compensation value for B channel */
> +#define ADOFF_R 0x36 /* AD offset compensation value for R channel */
> +#define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */
> +#define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */
> +#define OFF_B 0x39 /* Analog process B channel offset value */
> +#define OFF_R 0x3A /* Analog process R channel offset value */
> +#define OFF_GB 0x3B /* Analog process Gb channel offset value */
> +#define OFF_GR 0x3C /* Analog process Gr channel offset value */
> +#define COM12 0x3D /* Common control 12 */
> +#define COM13 0x3E /* Common control 13 */
> +#define COM14 0x3F /* Common control 14 */
> +#define COM15 0x40 /* Common control 15*/
> +#define COM16 0x41 /* Common control 16 */
> +#define TGT_B 0x42 /* BLC blue channel target value */
> +#define TGT_R 0x43 /* BLC red channel target value */
> +#define TGT_GB 0x44 /* BLC Gb channel target value */
> +#define TGT_GR 0x45 /* BLC Gr channel target value */
> +/* for ov7720 */
> +#define LCC0 0x46 /* Lens correction control 0 */
> +#define LCC1 0x47 /* Lens correction option 1 - X coordinate */
> +#define LCC2 0x48 /* Lens correction option 2 - Y coordinate */
> +#define LCC3 0x49 /* Lens correction option 3 */
> +#define LCC4 0x4A /* Lens correction option 4 - radius of the circular */
> +#define LCC5 0x4B /* Lens correction option 5 */
> +#define LCC6 0x4C /* Lens correction option 6 */
> +/* for ov7725 */
> +#define LC_CTR 0x46 /* Lens correction control */
> +#define LC_XC 0x47 /* X coordinate of lens correction center relative */
> +#define LC_YC 0x48 /* Y coordinate of lens correction center relative */
> +#define LC_COEF 0x49 /* Lens correction coefficient */
> +#define LC_RADI 0x4A /* Lens correction radius */
> +#define LC_COEFB 0x4B /* Lens B channel compensation coefficient */
> +#define LC_COEFR 0x4C /* Lens R channel compensation coefficient */
> +
> +#define FIXGAIN 0x4D /* Analog fix gain amplifer */
> +#define AREF0 0x4E /* Sensor reference control */
> +#define AREF1 0x4F /* Sensor reference current control */
> +#define AREF2 0x50 /* Analog reference control */
> +#define AREF3 0x51 /* ADC reference control */
> +#define AREF4 0x52 /* ADC reference control */
> +#define AREF5 0x53 /* ADC reference control */
> +#define AREF6 0x54 /* Analog reference control */
> +#define AREF7 0x55 /* Analog reference control */
> +#define UFIX 0x60 /* U channel fixed value output */
> +#define VFIX 0x61 /* V channel fixed value output */
> +#define AWBB_BLK 0x62 /* AWB option for advanced AWB */
> +#define AWB_CTRL0 0x63 /* AWB control byte 0 */
> +#define DSP_CTRL1 0x64 /* DSP control byte 1 */
> +#define DSP_CTRL2 0x65 /* DSP control byte 2 */
> +#define DSP_CTRL3 0x66 /* DSP control byte 3 */
> +#define DSP_CTRL4 0x67 /* DSP control byte 4 */
> +#define AWB_BIAS 0x68 /* AWB BLC level clip */
> +#define AWB_CTRL1 0x69 /* AWB control 1 */
> +#define AWB_CTRL2 0x6A /* AWB control 2 */
> +#define AWB_CTRL3 0x6B /* AWB control 3 */
> +#define AWB_CTRL4 0x6C /* AWB control 4 */
> +#define AWB_CTRL5 0x6D /* AWB control 5 */
> +#define AWB_CTRL6 0x6E /* AWB control 6 */
> +#define AWB_CTRL7 0x6F /* AWB control 7 */
> +#define AWB_CTRL8 0x70 /* AWB control 8 */
> +#define AWB_CTRL9 0x71 /* AWB control 9 */
> +#define AWB_CTRL10 0x72 /* AWB control 10 */
> +#define AWB_CTRL11 0x73 /* AWB control 11 */
> +#define AWB_CTRL12 0x74 /* AWB control 12 */
> +#define AWB_CTRL13 0x75 /* AWB control 13 */
> +#define AWB_CTRL14 0x76 /* AWB control 14 */
> +#define AWB_CTRL15 0x77 /* AWB control 15 */
> +#define AWB_CTRL16 0x78 /* AWB control 16 */
> +#define AWB_CTRL17 0x79 /* AWB control 17 */
> +#define AWB_CTRL18 0x7A /* AWB control 18 */
> +#define AWB_CTRL19 0x7B /* AWB control 19 */
> +#define AWB_CTRL20 0x7C /* AWB control 20 */
> +#define AWB_CTRL21 0x7D /* AWB control 21 */
> +#define GAM1 0x7E /* Gamma Curve 1st segment input end point */
> +#define GAM2 0x7F /* Gamma Curve 2nd segment input end point */
> +#define GAM3 0x80 /* Gamma Curve 3rd segment input end point */
> +#define GAM4 0x81 /* Gamma Curve 4th segment input end point */
> +#define GAM5 0x82 /* Gamma Curve 5th segment input end point */
> +#define GAM6 0x83 /* Gamma Curve 6th segment input end point */
> +#define GAM7 0x84 /* Gamma Curve 7th segment input end point */
> +#define GAM8 0x85 /* Gamma Curve 8th segment input end point */
> +#define GAM9 0x86 /* Gamma Curve 9th segment input end point */
> +#define GAM10 0x87 /* Gamma Curve 10th segment input end point */
> +#define GAM11 0x88 /* Gamma Curve 11th segment input end point */
> +#define GAM12 0x89 /* Gamma Curve 12th segment input end point */
> +#define GAM13 0x8A /* Gamma Curve 13th segment input end point */
> +#define GAM14 0x8B /* Gamma Curve 14th segment input end point */
> +#define GAM15 0x8C /* Gamma Curve 15th segment input end point */
> +#define SLOP 0x8D /* Gamma curve highest segment slope */
> +#define DNSTH 0x8E /* De-noise threshold */
> +#define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */
> +#define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */
> +#define DNSOFF 0x91 /* Auto De-noise threshold control */
> +#define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */
> +#define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */
> +#define MTX1 0x94 /* Matrix coefficient 1 */
> +#define MTX2 0x95 /* Matrix coefficient 2 */
> +#define MTX3 0x96 /* Matrix coefficient 3 */
> +#define MTX4 0x97 /* Matrix coefficient 4 */
> +#define MTX5 0x98 /* Matrix coefficient 5 */
> +#define MTX6 0x99 /* Matrix coefficient 6 */
> +#define MTX_CTRL 0x9A /* Matrix control */
> +#define BRIGHT 0x9B /* Brightness control */
> +#define CNTRST 0x9C /* Contrast contrast */
> +#define CNTRST_CTRL 0x9D /* Contrast contrast center */
> +#define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */
> +#define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */
> +#define SCAL0 0xA0 /* Scaling control 0 */
> +#define SCAL1 0xA1 /* Scaling control 1 */
> +#define SCAL2 0xA2 /* Scaling control 2 */
> +#define FIFODLYM 0xA3 /* FIFO manual mode delay control */
> +#define FIFODLYA 0xA4 /* FIFO auto mode delay control */
> +#define SDE 0xA6 /* Special digital effect control */
> +#define USAT 0xA7 /* U component saturation control */
> +#define VSAT 0xA8 /* V component saturation control */
> +/* for ov7720 */
> +#define HUE0 0xA9 /* Hue control 0 */
> +#define HUE1 0xAA /* Hue control 1 */
> +/* for ov7725 */
> +#define HUECOS 0xA9 /* Cosine value */
> +#define HUESIN 0xAA /* Sine value */
> +
> +#define SIGN 0xAB /* Sign bit for Hue and contrast */
> +#define DSPAUTO 0xAC /* DSP auto function ON/OFF control */
> +
> +/*
> + * register detail
> + */
> +
> +/* COM2 */
> +#define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */
> + /* Output drive capability */
> +#define OCAP_1x 0x00 /* 1x */
> +#define OCAP_2x 0x01 /* 2x */
> +#define OCAP_3x 0x02 /* 3x */
> +#define OCAP_4x 0x03 /* 4x */
> +
> +/* COM3 */
> +#define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML)
> +#define IMG_MASK (VFLIP_IMG | HFLIP_IMG)
> +
> +#define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */
> +#define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */
> +#define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */
> +#define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */
> +#define SWAP_ML 0x08 /* Swap output MSB/LSB */
> + /* Tri-state option for output clock */
> +#define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */
> + /* 1: No tri-state at this period */
> + /* Tri-state option for output data */
> +#define NOTRI_DATA 0x02 /* 0: Tri-state at this period */
> + /* 1: No tri-state at this period */
> +#define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */
> +
> +/* COM4 */
> + /* PLL frequency control */
> +#define PLL_BYPASS 0x00 /* 00: Bypass PLL */
> +#define PLL_4x 0x40 /* 01: PLL 4x */
> +#define PLL_6x 0x80 /* 10: PLL 6x */
> +#define PLL_8x 0xc0 /* 11: PLL 8x */
> + /* AEC evaluate window */
> +#define AEC_FULL 0x00 /* 00: Full window */
> +#define AEC_1p2 0x10 /* 01: 1/2 window */
> +#define AEC_1p4 0x20 /* 10: 1/4 window */
> +#define AEC_2p3 0x30 /* 11: Low 2/3 window */
> +
> +/* COM5 */
> +#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
> +#define AFR_SPPED 0x40 /* Auto frame rate control speed selection */
> + /* Auto frame rate max rate control */
> +#define AFR_NO_RATE 0x00 /* No reduction of frame rate */
> +#define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */
> +#define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */
> +#define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */
> + /* Auto frame rate active point control */
> +#define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */
> +#define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */
> +#define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */
> +#define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */
> + /* AEC max step control */
> +#define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
> + /* 1 : No limit to AEC increase step */
> +
> +/* COM7 */
> + /* SCCB Register Reset */
> +#define SCCB_RESET 0x80 /* 0 : No change */
> + /* 1 : Resets all registers to default */
> + /* Resolution selection */
> +#define SLCT_MASK 0x40 /* Mask of VGA or QVGA */
> +#define SLCT_VGA 0x00 /* 0 : VGA */
> +#define SLCT_QVGA 0x40 /* 1 : QVGA */
> +#define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */
> +#define SENSOR_RAW 0x10 /* Sensor RAW */
> + /* RGB output format control */
> +#define FMT_MASK 0x0c /* Mask of color format */
> +#define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */
> +#define FMT_RGB565 0x04 /* 01 : RGB 565 */
> +#define FMT_RGB555 0x08 /* 10 : RGB 555 */
> +#define FMT_RGB444 0x0c /* 11 : RGB 444 */
> + /* Output format control */
> +#define OFMT_MASK 0x03 /* Mask of output format */
> +#define OFMT_YUV 0x00 /* 00 : YUV */
> +#define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */
> +#define OFMT_RGB 0x02 /* 10 : RGB */
> +#define OFMT_BRAW 0x03 /* 11 : Bayer RAW */
> +
> +/* COM8 */
> +#define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */
> + /* AEC Setp size limit */
> +#define UNLMT_STEP 0x40 /* 0 : Step size is limited */
> + /* 1 : Unlimited step size */
> +#define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */
> +#define AEC_BND 0x10 /* Enable AEC below banding value */
> +#define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */
> +#define AGC_ON 0x04 /* AGC Enable */
> +#define AWB_ON 0x02 /* AWB Enable */
> +#define AEC_ON 0x01 /* AEC Enable */
> +
> +/* COM9 */
> +#define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */
> + /* Automatic gain ceiling - maximum AGC value */
> +#define GAIN_2x 0x00 /* 000 : 2x */
> +#define GAIN_4x 0x10 /* 001 : 4x */
> +#define GAIN_8x 0x20 /* 010 : 8x */
> +#define GAIN_16x 0x30 /* 011 : 16x */
> +#define GAIN_32x 0x40 /* 100 : 32x */
> +#define GAIN_64x 0x50 /* 101 : 64x */
> +#define GAIN_128x 0x60 /* 110 : 128x */
> +#define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */
> +#define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */
> +
> +/* COM11 */
> +#define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */
> +#define SGLF_TRIG 0x01 /* Single frame transfer trigger */
> +
> +/* HREF */
> +#define HREF_VSTART_SHIFT 6 /* VSTART LSB */
> +#define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */
> +#define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */
> +#define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */
> +
> +/* EXHCH */
> +#define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */
> +#define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */
> +
> +/* DSP_CTRL1 */
> +#define FIFO_ON 0x80 /* FIFO enable/disable selection */
> +#define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */
> +#define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */
> +#define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */
> +#define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */
> +#define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */
> +#define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */
> +#define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */
> +
> +/* DSP_CTRL3 */
> +#define UV_MASK 0x80 /* UV output sequence option */
> +#define UV_ON 0x80 /* ON */
> +#define UV_OFF 0x00 /* OFF */
> +#define CBAR_MASK 0x20 /* DSP Color bar mask */
> +#define CBAR_ON 0x20 /* ON */
> +#define CBAR_OFF 0x00 /* OFF */
> +
> +/* DSP_CTRL4 */
> +#define DSP_OFMT_YUV 0x00
> +#define DSP_OFMT_RGB 0x00
> +#define DSP_OFMT_RAW8 0x02
> +#define DSP_OFMT_RAW10 0x03
> +
> +/* DSPAUTO (DSP Auto Function ON/OFF Control) */
> +#define AWB_ACTRL 0x80 /* AWB auto threshold control */
> +#define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */
> +#define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */
> +#define UV_ACTRL 0x10 /* UV adjust auto slope control */
> +#define SCAL0_ACTRL 0x08 /* Auto scaling factor control */
> +#define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */
> +
> +#define OV772X_MAX_WIDTH VGA_WIDTH
> +#define OV772X_MAX_HEIGHT VGA_HEIGHT
> +
> +/*
> + * ID
> + */
> +#define OV7720 0x7720
> +#define OV7725 0x7721
> +#define VERSION(pid, ver) ((pid<<8)|(ver&0xFF))
> +
> +/*
> + * struct
> + */
> +
> +struct ov772x_color_format {
> + u32 code;
> + enum v4l2_colorspace colorspace;
> + u8 dsp3;
> + u8 dsp4;
> + u8 com3;
> + u8 com7;
> +};
> +
> +struct ov772x_win_size {
> + char *name;
> + unsigned char com7_bit;
> + struct v4l2_rect rect;
> +};
> +
> +struct ov772x_priv {
> + struct v4l2_subdev subdev;
> + struct v4l2_ctrl_handler hdl;
> + struct v4l2_clk *clk;
> + struct ov772x_camera_info *info;
> + const struct ov772x_color_format *cfmt;
> + const struct ov772x_win_size *win;
> + unsigned short flag_vflip:1;
> + unsigned short flag_hflip:1;
> + /* band_filter = COM8[5] ? 256 - BDBASE : 0 */
> + unsigned short band_filter;
> +};
> +
> +/*
> + * supported color format list
> + */
> +static const struct ov772x_color_format ov772x_cfmts[] = {
> + {
> + .code = MEDIA_BUS_FMT_YUYV8_2X8,
> + .colorspace = V4L2_COLORSPACE_JPEG,

It's just COLORSPACE_SRGB for all.

> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = SWAP_YUV,
> + .com7 = OFMT_YUV,
> + },
> + {
> + .code = MEDIA_BUS_FMT_YVYU8_2X8,
> + .colorspace = V4L2_COLORSPACE_JPEG,
> + .dsp3 = UV_ON,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = SWAP_YUV,
> + .com7 = OFMT_YUV,
> + },
> + {
> + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> + .colorspace = V4L2_COLORSPACE_JPEG,
> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = 0x0,
> + .com7 = OFMT_YUV,
> + },
> + {
> + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = SWAP_RGB,
> + .com7 = FMT_RGB555 | OFMT_RGB,
> + },
> + {
> + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = 0x0,
> + .com7 = FMT_RGB555 | OFMT_RGB,
> + },
> + {
> + .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = SWAP_RGB,
> + .com7 = FMT_RGB565 | OFMT_RGB,
> + },
> + {
> + .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_YUV,
> + .com3 = 0x0,
> + .com7 = FMT_RGB565 | OFMT_RGB,
> + },
> + {
> + /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output,
> + * regardless of the COM7 value. We can thus only support 10-bit
> + * Bayer until someone figures it out.
> + */
> + .code = MEDIA_BUS_FMT_SBGGR10_1X10,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .dsp3 = 0x0,
> + .dsp4 = DSP_OFMT_RAW10,
> + .com3 = 0x0,
> + .com7 = SENSOR_RAW | OFMT_BRAW,
> + },
> +};
> +
> +
> +/*
> + * window size list
> + */
> +
> +static const struct ov772x_win_size ov772x_win_sizes[] = {
> + {
> + .name = "VGA",
> + .com7_bit = SLCT_VGA,
> + .rect = {
> + .left = 140,
> + .top = 14,
> + .width = VGA_WIDTH,
> + .height = VGA_HEIGHT,
> + },
> + }, {
> + .name = "QVGA",
> + .com7_bit = SLCT_QVGA,
> + .rect = {
> + .left = 252,
> + .top = 6,
> + .width = QVGA_WIDTH,
> + .height = QVGA_HEIGHT,
> + },
> + },
> +};
> +
> +/*
> + * general function
> + */
> +
> +static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct ov772x_priv, subdev);
> +}
> +
> +static inline int ov772x_read(struct i2c_client *client, u8 addr)
> +{
> + return i2c_smbus_read_byte_data(client, addr);
> +}
> +
> +static inline int ov772x_write(struct i2c_client *client, u8 addr, u8 value)
> +{
> + return i2c_smbus_write_byte_data(client, addr, value);
> +}
> +
> +static int ov772x_mask_set(struct i2c_client *client, u8 command, u8 mask,
> + u8 set)
> +{
> + s32 val = ov772x_read(client, command);
> + if (val < 0)
> + return val;
> +
> + val &= ~mask;
> + val |= set & mask;
> +
> + return ov772x_write(client, command, val);
> +}
> +
> +static int ov772x_reset(struct i2c_client *client)
> +{
> + int ret;
> +
> + ret = ov772x_write(client, COM7, SCCB_RESET);
> + if (ret < 0)
> + return ret;
> +
> + msleep(1);
> +
> + return ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
> +}
> +
> +/*
> + * soc_camera_ops function
> + */
> +
> +static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ov772x_priv *priv = to_ov772x(sd);
> +
> + if (!enable) {
> + ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
> + return 0;
> + }
> +
> + ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0);
> +
> + dev_dbg(&client->dev, "format %d, win %s\n",
> + priv->cfmt->code, priv->win->name);
> +
> + return 0;
> +}
> +
> +static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct ov772x_priv *priv = container_of(ctrl->handler,
> + struct ov772x_priv, hdl);
> + struct v4l2_subdev *sd = &priv->subdev;
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int ret = 0;
> + u8 val;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_VFLIP:
> + val = ctrl->val ? VFLIP_IMG : 0x00;
> + priv->flag_vflip = ctrl->val;
> + if (priv->info->flags & OV772X_FLAG_VFLIP)
> + val ^= VFLIP_IMG;
> + return ov772x_mask_set(client, COM3, VFLIP_IMG, val);
> + case V4L2_CID_HFLIP:
> + val = ctrl->val ? HFLIP_IMG : 0x00;
> + priv->flag_hflip = ctrl->val;
> + if (priv->info->flags & OV772X_FLAG_HFLIP)
> + val ^= HFLIP_IMG;
> + return ov772x_mask_set(client, COM3, HFLIP_IMG, val);
> + case V4L2_CID_BAND_STOP_FILTER:
> + if (!ctrl->val) {
> + /* Switch the filter off, it is on now */
> + ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff);
> + if (!ret)
> + ret = ov772x_mask_set(client, COM8,
> + BNDF_ON_OFF, 0);
> + } else {
> + /* Switch the filter on, set AEC low limit */
> + val = 256 - ctrl->val;
> + ret = ov772x_mask_set(client, COM8,
> + BNDF_ON_OFF, BNDF_ON_OFF);
> + if (!ret)
> + ret = ov772x_mask_set(client, BDBASE,
> + 0xff, val);
> + }
> + if (!ret)
> + priv->band_filter = ctrl->val;
> + return ret;
> + }
> +
> + return -EINVAL;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int ov772x_g_register(struct v4l2_subdev *sd,
> + struct v4l2_dbg_register *reg)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + int ret;
> +
> + reg->size = 1;
> + if (reg->reg > 0xff)
> + return -EINVAL;
> +
> + ret = ov772x_read(client, reg->reg);
> + if (ret < 0)
> + return ret;
> +
> + reg->val = (__u64)ret;
> +
> + return 0;
> +}
> +
> +static int ov772x_s_register(struct v4l2_subdev *sd,
> + const struct v4l2_dbg_register *reg)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> +
> + if (reg->reg > 0xff ||
> + reg->val > 0xff)
> + return -EINVAL;
> +
> + return ov772x_write(client, reg->reg, reg->val);
> +}
> +#endif
> +
> +static int ov772x_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> + struct ov772x_priv *priv = to_ov772x(sd);
> +
> + return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
> +}
> +
> +static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
> +{
> + const struct ov772x_win_size *win = &ov772x_win_sizes[0];
> + u32 best_diff = UINT_MAX;
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) {
> + u32 diff = abs(width - ov772x_win_sizes[i].rect.width)
> + + abs(height - ov772x_win_sizes[i].rect.height);
> + if (diff < best_diff) {
> + best_diff = diff;
> + win = &ov772x_win_sizes[i];
> + }
> + }
> +
> + return win;
> +}
> +
> +static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf,
> + const struct ov772x_color_format **cfmt,
> + const struct ov772x_win_size **win)
> +{
> + unsigned int i;
> +
> + /* Select a format. */
> + *cfmt = &ov772x_cfmts[0];
> +
> + for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) {
> + if (mf->code == ov772x_cfmts[i].code) {
> + *cfmt = &ov772x_cfmts[i];
> + break;
> + }
> + }
> +
> + /* Select a window size. */
> + *win = ov772x_select_win(mf->width, mf->height);
> +}
> +
> +static int ov772x_set_params(struct ov772x_priv *priv,
> + const struct ov772x_color_format *cfmt,
> + const struct ov772x_win_size *win)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
> + int ret;
> + u8 val;
> +
> + /*
> + * reset hardware
> + */
> + ov772x_reset(client);
> +
> + /*
> + * Edge Ctrl
> + */
> + if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
> +
> + /*
> + * Manual Edge Control Mode
> + *
> + * Edge auto strength bit is set by default.
> + * Remove it when manual mode.
> + */
> +
> + ret = ov772x_mask_set(client, DSPAUTO, EDGE_ACTRL, 0x00);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + ret = ov772x_mask_set(client,
> + EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK,
> + priv->info->edgectrl.threshold);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + ret = ov772x_mask_set(client,
> + EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK,
> + priv->info->edgectrl.strength);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
> + /*
> + * Auto Edge Control Mode
> + *
> + * set upper and lower limit
> + */
> + ret = ov772x_mask_set(client,
> + EDGE_UPPER, OV772X_EDGE_UPPER_MASK,
> + priv->info->edgectrl.upper);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + ret = ov772x_mask_set(client,
> + EDGE_LOWER, OV772X_EDGE_LOWER_MASK,
> + priv->info->edgectrl.lower);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + }
> +
> + /* Format and window size */
> + ret = ov772x_write(client, HSTART, win->rect.left >> 2);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, HSIZE, win->rect.width >> 2);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, VSTART, win->rect.top >> 1);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, VSIZE, win->rect.height >> 1);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, HOUTSIZE, win->rect.width >> 2);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, VOUTSIZE, win->rect.height >> 1);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, HREF,
> + ((win->rect.top & 1) << HREF_VSTART_SHIFT) |
> + ((win->rect.left & 3) << HREF_HSTART_SHIFT) |
> + ((win->rect.height & 1) << HREF_VSIZE_SHIFT) |
> + ((win->rect.width & 3) << HREF_HSIZE_SHIFT));
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + ret = ov772x_write(client, EXHCH,
> + ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) |
> + ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT));
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + /*
> + * set DSP_CTRL3
> + */
> + val = cfmt->dsp3;
> + if (val) {
> + ret = ov772x_mask_set(client,
> + DSP_CTRL3, UV_MASK, val);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + }
> +
> + /* DSP_CTRL4: AEC reference point and DSP output format. */
> + if (cfmt->dsp4) {
> + ret = ov772x_write(client, DSP_CTRL4, cfmt->dsp4);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + }
> +
> + /*
> + * set COM3
> + */
> + val = cfmt->com3;
> + if (priv->info->flags & OV772X_FLAG_VFLIP)
> + val |= VFLIP_IMG;
> + if (priv->info->flags & OV772X_FLAG_HFLIP)
> + val |= HFLIP_IMG;
> + if (priv->flag_vflip)
> + val ^= VFLIP_IMG;
> + if (priv->flag_hflip)
> + val ^= HFLIP_IMG;
> +
> + ret = ov772x_mask_set(client,
> + COM3, SWAP_MASK | IMG_MASK, val);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + /* COM7: Sensor resolution and output format control. */
> + ret = ov772x_write(client, COM7, win->com7_bit | cfmt->com7);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> +
> + /*
> + * set COM8
> + */
> + if (priv->band_filter) {
> + ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
> + if (!ret)
> + ret = ov772x_mask_set(client, BDBASE,
> + 0xff, 256 - priv->band_filter);
> + if (ret < 0)
> + goto ov772x_set_fmt_error;
> + }
> +
> + return ret;
> +
> +ov772x_set_fmt_error:
> +
> + ov772x_reset(client);
> +
> + return ret;
> +}
> +
> +static int ov772x_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_selection *sel)
> +{
> + if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> + return -EINVAL;
> +
> + sel->r.left = 0;
> + sel->r.top = 0;
> + switch (sel->target) {
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + sel->r.width = OV772X_MAX_WIDTH;
> + sel->r.height = OV772X_MAX_HEIGHT;
> + return 0;
> + case V4L2_SEL_TGT_CROP:
> + sel->r.width = VGA_WIDTH;
> + sel->r.height = VGA_HEIGHT;

If you don't do actual cropping, then all three should return the current
selected framesize (VGA or QVGA).

> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int ov772x_get_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct v4l2_mbus_framefmt *mf = &format->format;
> + struct ov772x_priv *priv = to_ov772x(sd);
> +
> + if (format->pad)
> + return -EINVAL;
> +
> + mf->width = priv->win->rect.width;
> + mf->height = priv->win->rect.height;
> + mf->code = priv->cfmt->code;
> + mf->colorspace = priv->cfmt->colorspace;
> + mf->field = V4L2_FIELD_NONE;
> +
> + return 0;
> +}
> +
> +static int ov772x_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct ov772x_priv *priv = to_ov772x(sd);
> + struct v4l2_mbus_framefmt *mf = &format->format;
> + const struct ov772x_color_format *cfmt;
> + const struct ov772x_win_size *win;
> + int ret;
> +
> + if (format->pad)
> + return -EINVAL;
> +
> + ov772x_select_params(mf, &cfmt, &win);
> +
> + mf->code = cfmt->code;
> + mf->width = win->rect.width;
> + mf->height = win->rect.height;
> + mf->field = V4L2_FIELD_NONE;
> + mf->colorspace = cfmt->colorspace;
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> + cfg->try_fmt = *mf;
> + return 0;
> + }
> +
> + ret = ov772x_set_params(priv, cfmt, win);
> + if (ret < 0)
> + return ret;
> +
> + priv->win = win;
> + priv->cfmt = cfmt;
> + return 0;
> +}
> +
> +static int ov772x_video_probe(struct ov772x_priv *priv)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
> + u8 pid, ver;
> + const char *devname;
> + int ret;
> +
> + ret = ov772x_s_power(&priv->subdev, 1);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * check and show product ID and manufacturer ID
> + */
> + pid = ov772x_read(client, PID);
> + ver = ov772x_read(client, VER);
> +
> + switch (VERSION(pid, ver)) {
> + case OV7720:
> + devname = "ov7720";
> + break;
> + case OV7725:
> + devname = "ov7725";
> + break;
> + default:
> + dev_err(&client->dev,
> + "Product ID error %x:%x\n", pid, ver);
> + ret = -ENODEV;
> + goto done;
> + }
> +
> + dev_info(&client->dev,
> + "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
> + devname,
> + pid,
> + ver,
> + ov772x_read(client, MIDH),
> + ov772x_read(client, MIDL));
> + ret = v4l2_ctrl_handler_setup(&priv->hdl);
> +
> +done:
> + ov772x_s_power(&priv->subdev, 0);
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
> + .s_ctrl = ov772x_s_ctrl,
> +};
> +
> +static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .g_register = ov772x_g_register,
> + .s_register = ov772x_s_register,
> +#endif
> + .s_power = ov772x_s_power,
> +};
> +
> +static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts))
> + return -EINVAL;
> +
> + code->code = ov772x_cfmts[code->index].code;
> + return 0;
> +}
> +
> +static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
> + struct v4l2_mbus_config *cfg)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> +
> + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
> + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> + V4L2_MBUS_DATA_ACTIVE_HIGH;
> + cfg->type = V4L2_MBUS_PARALLEL;
> + cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
> +
> + return 0;
> +}

Drop this, this should be specified in the DT. See also my comment in patch 3/10.
This op dates from pre-devicetree times and is really no longer needed.

> +
> +static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
> + .s_stream = ov772x_s_stream,
> + .g_mbus_config = ov772x_g_mbus_config,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
> + .enum_mbus_code = ov772x_enum_mbus_code,
> + .get_selection = ov772x_get_selection,
> + .get_fmt = ov772x_get_fmt,
> + .set_fmt = ov772x_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops ov772x_subdev_ops = {
> + .core = &ov772x_subdev_core_ops,
> + .video = &ov772x_subdev_video_ops,
> + .pad = &ov772x_subdev_pad_ops,
> +};
> +
> +/*
> + * i2c_driver function
> + */
> +
> +static int ov772x_probe(struct i2c_client *client,
> + const struct i2c_device_id *did)
> +{
> + struct ov772x_priv *priv;
> + struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> + int ret;
> +
> + if (!ssdd || !ssdd->drv_priv) {
> + dev_err(&client->dev, "OV772X: missing platform data!\n");
> + return -EINVAL;
> + }
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_PROTOCOL_MANGLING)) {
> + dev_err(&adapter->dev,
> + "I2C-Adapter doesn't support SMBUS_BYTE_DATA or PROTOCOL_MANGLING\n");
> + return -EIO;
> + }
> + client->flags |= I2C_CLIENT_SCCB;
> +
> + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->info = ssdd->drv_priv;
> +
> + v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
> + v4l2_ctrl_handler_init(&priv->hdl, 3);
> + v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
> + V4L2_CID_VFLIP, 0, 1, 1, 0);
> + v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
> + V4L2_CID_HFLIP, 0, 1, 1, 0);
> + v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
> + V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0);
> + priv->subdev.ctrl_handler = &priv->hdl;
> + if (priv->hdl.error)
> + return priv->hdl.error;
> +
> + priv->clk = v4l2_clk_get(&client->dev, "mclk");
> + if (IS_ERR(priv->clk)) {
> + ret = PTR_ERR(priv->clk);
> + goto eclkget;
> + }
> +
> + ret = ov772x_video_probe(priv);
> + if (ret < 0) {
> + v4l2_clk_put(priv->clk);
> +eclkget:
> + v4l2_ctrl_handler_free(&priv->hdl);
> + } else {
> + priv->cfmt = &ov772x_cfmts[0];
> + priv->win = &ov772x_win_sizes[0];
> + }
> +
> + return ret;
> +}
> +
> +static int ov772x_remove(struct i2c_client *client)
> +{
> + struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
> +
> + v4l2_clk_put(priv->clk);
> + v4l2_device_unregister_subdev(&priv->subdev);
> + v4l2_ctrl_handler_free(&priv->hdl);
> + return 0;
> +}
> +
> +static const struct i2c_device_id ov772x_id[] = {
> + { "ov772x", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ov772x_id);
> +
> +static struct i2c_driver ov772x_i2c_driver = {
> + .driver = {
> + .name = "ov772x",
> + },
> + .probe = ov772x_probe,
> + .remove = ov772x_remove,
> + .id_table = ov772x_id,
> +};
> +
> +module_i2c_driver(ov772x_i2c_driver);
> +
> +MODULE_DESCRIPTION("SoC Camera driver for ov772x");

Update the description.

> +MODULE_AUTHOR("Kuninori Morimoto");

Author as well? Or add your name to it.

> +MODULE_LICENSE("GPL v2");
>

Regards,

Hans

\
 
 \ /
  Last update: 2017-12-13 13:11    [W:0.380 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site