lkml.org 
[lkml]   [2017]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 10/15] soundwire: Add sysfs for SoundWire DisCo properties
On Wed, Dec 13, 2017 at 10:15:37AM +0100, Greg Kroah-Hartman wrote:
> On Wed, Dec 06, 2017 at 09:17:06PM +0530, Vinod Koul wrote:
> > It helps to read the properties for understanding and debugging
> > systems, so add sysfs files for SoundWire DisCo properties.
> >
> > TODO: Add ABI files for sysfs
>
> Is this TODO done?

Nope sorry not yet. But before this get merged will add

> > + * Base file is:
> > + * properties
> > + * |---- interface-revision
> > + * |---- master-count
> > + * |---- link-N
> > + * |---- clock-stop-modes
> > + * |---- max-clock-frequency
> > + * |---- clock-frequencies
> > + * |---- default-frame-rows
> > + * |---- default-frame-cols
> > + * |---- dynamic-frame-shape
> > + * |---- command-error-threshold
> > + */
>
> Why nest them so deep? Anyway, that's not really an issue I guess, it's
> your ABI, not mine :)

well it gives us a hierarchical view. We have N links...

>
> > +
> > +struct sdw_master_sysfs {
> > + struct kobject kobj;
> > + struct sdw_bus *bus;
>
> Huh? Why do you need to use kobjects?
>
> When you switch from using a 'struct device' and hang a kobject off of
> it, that's a huge signal that something is wrong here. That kobject
> will now no longer be part of the device "chain" in the system, uevents
> will get odd, and other strange things can happen.
>
> Why can't you just use "normal" attributes attached to the device? You
> shouldn't need a kobject here. What am I missing?

Okay my understanding might be incorrect then. So we can have N links in
the system and each link would have a kobject for "link-N". Not sure how
device attributes would do link-N/clock-stop-modes and so on, if they can
let me know how and I will surely change that.

>
> > +/*
> > + * Slave sysfs
> > + */
> > +
> > +/*
> > + * The sysfs for Slave reflects the MIPI description as given
> > + * in the MIPI DisCo spec
> > + *
> > + * Base file is device
> > + * |---- mipi_revision
> > + * |---- wake_capable
> > + * |---- test_mode_capable
> > + * |---- simple_clk_stop_capable
> > + * |---- clk_stop_timeout
> > + * |---- ch_prep_timeout
> > + * |---- reset_behave
> > + * |---- high_PHY_capable
> > + * |---- paging_support
> > + * |---- bank_delay_support
> > + * |---- p15_behave
> > + * |---- master_count
> > + * |---- source_ports
> > + * |---- sink_ports
> > + * |---- dp0
> > + * |---- max_word
> > + * |---- min_word
> > + * |---- words
> > + * |---- flow_controlled
> > + * |---- simple_ch_prep_sm
> > + * |---- device_interrupts
> > + * |---- dpN
> > + * |---- max_word
> > + * |---- min_word
> > + * |---- words
> > + * |---- type
> > + * |---- max_grouping
> > + * |---- simple_ch_prep_sm
> > + * |---- ch_prep_timeout
> > + * |---- device_interrupts
> > + * |---- max_ch
> > + * |---- min_ch
> > + * |---- ch
> > + * |---- ch_combinations
> > + * |---- modes
> > + * |---- max_async_buffer
> > + * |---- block_pack_mode
> > + * |---- port_encoding
> > + * |---- bus_min_freq
> > + * |---- bus_max_freq
> > + * |---- bus_freq
> > + * |---- max_freq
> > + * |---- min_freq
> > + * |---- freq
> > + * |---- prep_ch_behave
> > + * |---- glitchless
> > + *
> > + */
> > +struct sdw_slave_sysfs {
> > + struct sdw_slave *slave;
> > +};
>
> Same here, why are you using kobjects for this "device"? Shouldn't you
> use a real struct device for dpX?
>
> > +
> > +#define SLAVE_ATTR(type) \
> > +static ssize_t type##_show(struct device *dev, \
> > + struct device_attribute *attr, char *buf) \
> > +{ \
> > + struct sdw_slave *slave = dev_to_sdw_dev(dev); \
> > + return sprintf(buf, "0x%x\n", slave->prop.type); \
> > +} \
> > +static DEVICE_ATTR_RO(type)
>
> Oh wait, you are? I'm confused, is this a real device or not?

Yes it real device :) We have attributes and a device can have N data ports
which have their own attributes, so added kobject for each dpN and
attributes for those. So it would appear as: dpN/max_word and so in sysfs

If there a better way to do this without kobject, please do let me know and I
will change that

>
> > +
> > +SLAVE_ATTR(mipi_revision);
> > +SLAVE_ATTR(wake_capable);
> > +SLAVE_ATTR(test_mode_capable);
> > +SLAVE_ATTR(clk_stop_mode1);
> > +SLAVE_ATTR(simple_clk_stop_capable);
> > +SLAVE_ATTR(clk_stop_timeout);
> > +SLAVE_ATTR(ch_prep_timeout);
> > +SLAVE_ATTR(reset_behave);
> > +SLAVE_ATTR(high_PHY_capable);
> > +SLAVE_ATTR(paging_support);
> > +SLAVE_ATTR(bank_delay_support);
> > +SLAVE_ATTR(p15_behave);
> > +SLAVE_ATTR(master_count);
> > +SLAVE_ATTR(source_ports);
> > +
> > +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct sdw_slave *slave = dev_to_sdw_dev(dev);
> > +
> > + return sdw_slave_modalias(slave, buf, 256);
> > +}
> > +static DEVICE_ATTR_RO(modalias);
> > +
> > +static struct attribute *slave_dev_attrs[] = {
> > + &dev_attr_mipi_revision.attr,
> > + &dev_attr_wake_capable.attr,
> > + &dev_attr_test_mode_capable.attr,
> > + &dev_attr_clk_stop_mode1.attr,
> > + &dev_attr_simple_clk_stop_capable.attr,
> > + &dev_attr_clk_stop_timeout.attr,
> > + &dev_attr_ch_prep_timeout.attr,
> > + &dev_attr_reset_behave.attr,
> > + &dev_attr_high_PHY_capable.attr,
> > + &dev_attr_paging_support.attr,
> > + &dev_attr_bank_delay_support.attr,
> > + &dev_attr_p15_behave.attr,
> > + &dev_attr_master_count.attr,
> > + &dev_attr_source_ports.attr,
> > + &dev_attr_modalias.attr,
> > + NULL,
> > +};
> > +
> > +static struct attribute_group sdw_slave_dev_attr_group = {
> > + .attrs = slave_dev_attrs,
> > +};
> > +
> > +const struct attribute_group *sdw_slave_dev_attr_groups[] = {
> > + &sdw_slave_dev_attr_group,
> > + NULL
> > +};
> > diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
> > index e752db72a045..fce502d08fef 100644
> > --- a/include/linux/soundwire/sdw.h
> > +++ b/include/linux/soundwire/sdw.h
> > @@ -308,6 +308,15 @@ int sdw_master_read_prop(struct sdw_bus *bus);
> > int sdw_slave_read_prop(struct sdw_slave *slave);
> >
> > /*
> > + * SDW sysfs APIs
> > + */
> > +struct sdw_slave_sysfs;
> > +struct sdw_master_sysfs;
> > +
> > +int sdw_sysfs_bus_init(struct sdw_bus *bus);
>
> How are you handling the sysfs files showing up "after" the device is
> registered and userspace not seeing them? Have you tried using libudev
> to get the attributes? Does this all work properly? I think with the
> use of a kobject that breaks, and that's not good.

Ah i am missing an uevent here, will add. I will check the libudev too.

> > +void sdw_sysfs_bus_exit(struct sdw_bus *bus);
> > +
> > +/*
> > * SDW Slave Structures and APIs
> > */
> >
> > @@ -363,6 +372,7 @@ struct sdw_slave_ops {
> > * @bus: Bus handle
> > * @ops: Slave callback ops
> > * @prop: Slave properties
> > + * @sysfs: Sysfs interface
> > * @node: node for bus list
> > * @port_ready: Port ready completion flag for each Slave port
> > * @dev_num: Device Number assigned by Bus
> > @@ -374,6 +384,7 @@ struct sdw_slave {
> > struct sdw_bus *bus;
> > const struct sdw_slave_ops *ops;
> > struct sdw_slave_prop prop;
> > + struct sdw_slave_sysfs *sysfs;
>
> So a differently reference counted device is hanging off of this?
> That's the big objection to using a kobject here and should have been a
> clue that this isn't ok.

sdw_slave embeds the struct device and sysfs is for this device, shouldn't
that be okay?

>
> > struct list_head node;
> > struct completion *port_ready;
> > u16 dev_num;
> > @@ -453,6 +464,7 @@ struct sdw_master_ops {
> > * @msg_lock: message lock
> > * @ops: Master callback ops
> > * @prop: Master properties
> > + * @sysfs: Bus sysfs
> > * @defer_msg: Defer message
> > * @clk_stop_timeout: Clock stop timeout computed
> > */
> > @@ -465,6 +477,7 @@ struct sdw_bus {
> > struct mutex msg_lock;
> > const struct sdw_master_ops *ops;
> > struct sdw_master_prop prop;
> > + struct sdw_master_sysfs *sysfs;
>
> Same here.

sdw_bus represent master device and is registered by the driver. is there a
better way to handle this.

--
~Vinod

\
 
 \ /
  Last update: 2017-12-13 10:51    [W:0.106 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site