lkml.org 
[lkml]   [2017]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
Date
This patch unifies the OBINTEN handling to clean-up the code.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index c22d65a..beeaa30 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -147,6 +147,18 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
writel(val, usb2_base + USB2_ADPCTRL);
}

+static void rcar_gen3_enable_otg_irq(struct rcar_gen3_chan *ch, int enable)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val = readl(usb2_base + USB2_OBINTEN);
+
+ if (enable)
+ val |= USB2_OBINT_BITS;
+ else
+ val &= ~USB2_OBINT_BITS;
+ writel(val, usb2_base + USB2_OBINTEN);
+}
+
static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 1, 1);
@@ -192,16 +204,12 @@ static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)

static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
{
- void __iomem *usb2_base = ch->base;
- u32 val;
-
- val = readl(usb2_base + USB2_OBINTEN);
- writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+ rcar_gen3_enable_otg_irq(ch, 0);

rcar_gen3_enable_vbus_ctrl(ch, 0);
rcar_gen3_init_for_host(ch);

- writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+ rcar_gen3_enable_otg_irq(ch, 1);
}

static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
@@ -291,8 +299,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
val = readl(usb2_base + USB2_VBCTRL);
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
- val = readl(usb2_base + USB2_OBINTEN);
- writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+ rcar_gen3_enable_otg_irq(ch, 1);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
val = readl(usb2_base + USB2_LINECTRL1);
--
1.9.1
\
 
 \ /
  Last update: 2017-12-13 07:33    [W:0.168 / U:2.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site