lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/6] dt: bindings: lp8860: Update bindings for lp8860
Date
Update the lp8860 bindings to fix various issues
found. Add address-cells and size-cells, rename
enable-gpio to enable-gpios, update the node name
to the device name and indent the node example.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v4 - No changes

v3 - Indicatd enable-gpios is active high, moved address and size cells to child
node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/
v2 - New patch

Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..b9d09acbaa73 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input
signal, a SPI/I2C master, or both.

Required properties:
- - compatible:
+ - compatible :
"ti,lp8860"
- - reg - I2C slave address
- - label - Used for naming LEDs
+ - reg : I2C slave address
+ - label : Used for naming LEDs

Optional properties:
- - enable-gpio - gpio pin to enable/disable the device.
- - supply - "vled" - LED supply
+ - enable-gpios : gpio pin to enable (active high)/disable the device.
+ - vled-supply : LED supply

Example:

-leds: leds@6 {
+led-controller@2d {
compatible = "ti,lp8860";
reg = <0x2d>;
label = "display_cluster";
- enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
}

--
2.15.0.124.g7668cbc60
\
 
 \ /
  Last update: 2017-12-12 23:03    [W:0.116 / U:3.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site