[lkml]   [2017]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v10 00/13] Introduce framework for SLIMbus device driver
From: Srinivas Kandagatla <>

SLIMbus (Serial Low Power Interchip Media Bus) is a specification
developed by MIPI (Mobile Industry Processor Interface) alliance.
SLIMbus is a 2-wire implementation, which is used to communicate with
peripheral components like audio-codec.
SLIMbus uses Time-Division-Multiplexing to accommodate multiple data
channels, and control channel. Control channel has messages to do
device-enumeration, messages to send/receive control-data to/from
SLIMbus devices, messages for port/channel management, and messages to
do bandwidth allocation.
Framework is introduced to support multiple instances of the bus
(1 controller per bus), and multiple slave devices per controller.
SPI and I2C frameworks, and comments from last time when I submitted
the patches were referred-to while working on this framework.

These patchsets introduce device-management, OF helpers, and messaging
APIs, controller driver for Qualcomm's SLIMbus controller, and
clock-pause feature for entering/exiting low-power mode for SLIMbus.
Framework patches to do channel, port and bandwidth
management are work-in-progress and will be sent out once these
initial patches are accepted.

These patchsets were tested on IFC6410 board with Qualcomm APQ8064
processor using the controller driver, and a WCD9310 codec.


Changes from v9 to v10:
* Added kernel-doc reference into slimbus driver api doc suggested by
Jonathan Corbet

Sagar Dharia (9):
Documentation: Add SLIMbus summary
dt-bindings: Add SLIMbus bindings
slimbus: Add SLIMbus bus type
slimbus: core: Add slim controllers support
slimbus: Add messaging APIs to slimbus framework
slimbus: Add support for 'clock-pause' feature
dt-bindings: Add qcom slimbus controller bindings
slimbus: qcom: Add Qualcomm Slimbus controller driver
slimbus: qcom: Add runtime-pm support using clock-pause

Srinivas Kandagatla (4):
slimbus: core: add support to device tree helper
regmap: add SLIMbus support
slimbus: core: add common defines required for controllers
MAINTAINERS: Add SLIMbus maintainer

Documentation/devicetree/bindings/slimbus/bus.txt | 50 ++
.../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 39 ++
Documentation/driver-api/index.rst | 1 +
Documentation/driver-api/slimbus.rst | 127 ++++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/base/regmap/Kconfig | 4 +
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-slimbus.c | 80 +++
drivers/slimbus/Kconfig | 23 +
drivers/slimbus/Makefile | 10 +
drivers/slimbus/core.c | 480 +++++++++++++
drivers/slimbus/messaging.c | 330 +++++++++
drivers/slimbus/qcom-ctrl.c | 750 +++++++++++++++++++++
drivers/slimbus/sched.c | 121 ++++
drivers/slimbus/slimbus.h | 261 +++++++
include/linux/mod_devicetable.h | 13 +
include/linux/regmap.h | 18 +
include/linux/slimbus.h | 164 +++++
20 files changed, 2483 insertions(+)
create mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt
create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
create mode 100644 Documentation/driver-api/slimbus.rst
create mode 100644 drivers/base/regmap/regmap-slimbus.c
create mode 100644 drivers/slimbus/Kconfig
create mode 100644 drivers/slimbus/Makefile
create mode 100644 drivers/slimbus/core.c
create mode 100644 drivers/slimbus/messaging.c
create mode 100644 drivers/slimbus/qcom-ctrl.c
create mode 100644 drivers/slimbus/sched.c
create mode 100644 drivers/slimbus/slimbus.h
create mode 100644 include/linux/slimbus.h


 \ /
  Last update: 2017-12-12 00:46    [W:0.163 / U:1.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site