[lkml]   [2017]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v9 0/2] media: ov7740: Add a V4L2 sensor-level driver
Add a Video4Linux2 sensor-level driver for the OmniVision OV7740
VGA camera image sensor.

Changes in v9:
- Use the new SPDX ids.

Changes in v8:
- As the registers are written at stream start, remove the written
code from the set fmt function.

Changes in v7:
- Add Acked-by tag.
- Fix the wrong handle of default register configuration.
- Add the missed assignment of ov7740->frmsize.

Changes in v6:
- Remove unnecessary #include <linux/init>.
- Remove unnecessary comments and extra newline.
- Add const for some structures.
- Add the check of the return value from regmap_write().
- Simplify the calling of __v4l2_ctrl_handler_setup().
- Add the default format initialization function.
- Integrate the set_power() and enable/disable the clock into
one function.

Changes in v5:
- Squash the driver and MAINTAINERS entry patches to one.
- Precede the driver patch with the bindings patch.

Changes in v4:
- Assign 'val' a initial value to avoid warning: 'val' may be
used uninitialized.
- Rename REG_REG15 to avoid warning: "REG_REG15" redefined.

Changes in v3:
- Explicitly document the "remote-endpoint" property.
- Put the MAINTAINERS change to a separate patch.

Changes in v2:
- Split off the bindings into a separate patch.
- Add a new entry to the MAINTAINERS file.

Wenyou Yang (2):
media: ov7740: Document device tree bindings
media: i2c: Add the ov7740 image sensor driver

.../devicetree/bindings/media/i2c/ov7740.txt | 47 +
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov7740.c | 1216 ++++++++++++++++++++
5 files changed, 1280 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt
create mode 100644 drivers/media/i2c/ov7740.c


 \ /
  Last update: 2017-12-11 02:38    [W:0.098 / U:3.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site