lkml.org 
[lkml]   [2017]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] mtd: nand: gpmi: replace _manual_ swap with swap macro
Make use of the swap macro and remove unnecessary variables swap.
This makes the code easier to read and maintain.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 50f8d4a..9e365d4 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1487,12 +1487,8 @@ static int gpmi_ecc_read_page_raw(struct mtd_info *mtd,
* See the layout description for a detailed explanation on why this
* is needed.
*/
- if (this->swap_block_mark) {
- u8 swap = tmp_buf[0];
-
- tmp_buf[0] = tmp_buf[mtd->writesize];
- tmp_buf[mtd->writesize] = swap;
- }
+ if (this->swap_block_mark)
+ swap(tmp_buf[0], tmp_buf[mtd->writesize]);

/*
* Copy the metadata section into the oob buffer (this section is
@@ -1615,12 +1611,8 @@ static int gpmi_ecc_write_page_raw(struct mtd_info *mtd,
* See the layout description for a detailed explanation on why this
* is needed.
*/
- if (this->swap_block_mark) {
- u8 swap = tmp_buf[0];
-
- tmp_buf[0] = tmp_buf[mtd->writesize];
- tmp_buf[mtd->writesize] = swap;
- }
+ if (this->swap_block_mark)
+ swap(tmp_buf[0], tmp_buf[mtd->writesize]);

chip->write_buf(mtd, tmp_buf, mtd->writesize + mtd->oobsize);

--
2.7.4
\
 
 \ /
  Last update: 2017-11-03 21:32    [W:0.042 / U:29.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site