lkml.org 
[lkml]   [2017]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC] [PATCH] drm: adv7511/33: Fix adv7511_cec_init() failure handling
From
Date
On 11/17/2017 09:43 AM, Hans Verkuil wrote:
> If the device tree for a board did not specify a cec clock, then
> adv7511_cec_init would return an error, which would cause adv7511_probe()
> to fail and thus there is no HDMI output.
>
> There is no need to have adv7511_probe() fail if the CEC initialization
> fails, so just change adv7511_cec_init() to a void function. In addition,
> adv7511_cec_init() should just return silently if the cec clock isn't
> found and show a message for any other errors.
>
> An otherwise correct cleanup patch from Dan Carpenter turned this broken
> failure handling into a kernel Oops, so bisection points to commit
> 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather
> than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support").
>
> Based on earlier patches from Arnd and John.
>
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> Cc: Xinliang Liu <xinliang.liu@linaro.org>
> Cc: Dan Carpenter <dan.carpenter@oracle.com>
> Cc: Sean Paul <seanpaul@chromium.org>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Archit Taneja <architt@codeaurora.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Link: https://bugs.linaro.org/show_bug.cgi?id=3345
> Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551
> Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL")
> Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

I tested this patch on a Dragonboard and a Renesas Koelsch board. I also forced
errors in parsing the dts or registering the CEC adapter to test those failure
paths on both boards.

So:

Tested-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

Hans

> ---
> This rework of Arnd and John's patches goes a bit further and makes
> cec_init a void function and just silently exits if there is no cec clock
> defined in the dts. I'm sure that's the reason why the kirin board failed
> on this. BTW: if the kirin board DOES support cec, then it would be nice
> if it can be hooked up in the dts!
>
> I'll test this with my two adv7511/33 boards on Monday.
>
> Regards,
>
> Hans
> ---
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index 543a5eb91624..bc17aa965e58 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -374,8 +374,8 @@ struct adv7511 {
> };
>
> #ifdef CONFIG_DRM_I2C_ADV7511_CEC
> -int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
> - unsigned int offset);
> +void adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
> + unsigned int offset);
> void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
> #endif
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> index b33d730e4d73..c1cd471d31fa 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> @@ -300,18 +300,20 @@ static int adv7511_cec_parse_dt(struct device *dev, struct adv7511 *adv7511)
> return 0;
> }
>
> -int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
> - unsigned int offset)
> +void adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
> + unsigned int offset)
> {
> int ret = adv7511_cec_parse_dt(dev, adv7511);
>
> if (ret)
> - return ret;
> + goto disable_cec;
>
> adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
> adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
> - if (IS_ERR(adv7511->cec_adap))
> - return PTR_ERR(adv7511->cec_adap);
> + if (IS_ERR(adv7511->cec_adap)) {
> + ret = PTR_ERR(adv7511->cec_adap);
> + goto fail;
> + }
>
> regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
> /* cec soft reset */
> @@ -329,9 +331,15 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
> ((adv7511->cec_clk_freq / 750000) - 1) << 2);
>
> ret = cec_register_adapter(adv7511->cec_adap, dev);
> - if (ret) {
> - cec_delete_adapter(adv7511->cec_adap);
> - adv7511->cec_adap = NULL;
> - }
> - return ret;
> + if (!ret)
> + return;
> + cec_delete_adapter(adv7511->cec_adap);
> + adv7511->cec_adap = NULL;
> +
> +fail:
> + dev_info(dev, "Initializing CEC failed with error %d, disabling CEC\n",
> + ret);
> +disable_cec:
> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
> + ADV7511_CEC_CTRL_POWER_DOWN);
> }
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 3a33075dbb22..56eeeea6a1fa 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1202,9 +1202,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> offset = adv7511->type == ADV7533 ? ADV7533_REG_CEC_OFFSET : 0;
>
> #ifdef CONFIG_DRM_I2C_ADV7511_CEC
> - ret = adv7511_cec_init(dev, adv7511, offset);
> - if (ret)
> - goto err_unregister_cec;
> + adv7511_cec_init(dev, adv7511, offset);
> #else
> regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
> ADV7511_CEC_CTRL_POWER_DOWN);
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>

\
 
 \ /
  Last update: 2017-11-20 16:06    [W:0.207 / U:8.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site