lkml.org 
[lkml]   [2017]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] arm64: dts: qcom: msm8916: add bindings for i2c1, i2c3, i2c5
On Thu 09 Nov 09:14 PST 2017, Damien Riegel wrote:

> Hi Bjorn,
>
>
> On Thu, Nov 09, 2017 at 09:00:16AM -0800, Bjorn Andersson wrote:
> > On Wed 01 Nov 10:53 PDT 2017, Damien Riegel wrote:
> >
> > I think it's better to use the word "nodes" (add nodes...)
>
> Will reword that.
>
> >
> > > Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
> > > ---
> > > arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 72 ++++++++++++++++++++++++++++++
> > > arch/arm64/boot/dts/qcom/msm8916.dtsi | 45 +++++++++++++++++++
> > > 2 files changed, 117 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> > > index c67ad8ed8b60..1cec5b30ed6e 100644
> > > --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> > > @@ -270,6 +270,30 @@
> > > };
> > > };
> > >
> > > + i2c1_default: i2c1_default {
> > > + pinmux {
> > > + function = "blsp_i2c1";
> > > + pins = "gpio2", "gpio3";
> > > + };
> > > + pinconf {
> > > + pins = "gpio2", "gpio3";
> > > + drive-strength = <16>;
> > > + bias-disable;
> > > + };
> >
> > pinconf is typically board specific, so please leave these out from the
> > base dtsi.
>
> I don't mind dropping that, but pinconf for i2c{2,4,6} is already in
> msm8916-pins.dtsi, so we should either drop them all, or add pinconf for
> i2c{1,3,5} for consistency.

You're right, this needs to be consistent. So I would like us to update
the existing nodes,

> And if I read the pinctrl driver correctly,
> I2C cannot be routed to other pins, the only properties that users may
> want to modify are drive-strength and bias. Let me know which option you
> prefer.
>

I discussed the matter with my colleagues and we concluded that we want
to keep the muxing in the platform.dtsi and move the specification of
the electrical properties (pinconf) to the board.dts(i).

We did discuss having some "default values" in the platform file, but
pushing these down to the board file gives an indication to others that
these values are board specific.


PS. If you're willing to provide a patch for the existing nodes I would
be happy to review this as well!

Regards,
Bjorn

\
 
 \ /
  Last update: 2017-11-11 08:56    [W:0.078 / U:39.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site