Messages in this thread Patch in this message |  | | Date | Mon, 9 Oct 2017 23:03:40 +0200 | From | Maxime Ripard <> | Subject | Re: [PATCH 2/6] ARM: sun8i: r40: add USB host port nodes for R40 |
| |
On Sun, Oct 08, 2017 at 04:29:02AM +0000, Icenowy Zheng wrote: > From: Icenowy Zheng <icenowy@aosc.xyz> > > Allwinner R40 SoC features a USB OTG port and two USB HOST ports. > > Add support for the host ports in the DTSI file. > > The OTG controller still cannot work with existing compatibles, and needs > more investigation. So it's not added yet. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> > --- > arch/arm/boot/dts/sun8i-r40.dtsi | 78 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 78 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi > index d5a6745409ae..f6c917cbbaac 100644 > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > @@ -173,6 +173,84 @@ > #size-cells = <0>; > }; > > + usbphy: phy@1c13400 { > + compatible = "allwinner,sun8i-r40-usb-phy"; > + reg = <0x01c13400 0x14>, > + <0x01c14800 0x4>, > + <0x01c19800 0x4>, > + <0x01c1c800 0x4>; > + reg-names = "phy_ctrl", > + "pmu0", > + "pmu1", > + "pmu2"; > + clocks = <&ccu CLK_USB_PHY0>, > + <&ccu CLK_USB_PHY1>, > + <&ccu CLK_USB_PHY2>; > + clock-names = "usb0_phy", > + "usb1_phy", > + "usb2_phy"; > + resets = <&ccu RST_USB_PHY0>, > + <&ccu RST_USB_PHY1>, > + <&ccu RST_USB_PHY2>; > + reset-names = "usb0_reset", > + "usb1_reset", > + "usb2_reset"; > + status = "disabled"; > + #phy-cells = <1>; > + }; > + > + ehci1: usb@1c19000 { > + compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; > + reg = <0x01c19000 0x100>;
What is the actual size here?
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_OHCI1>, > + <&ccu CLK_BUS_EHCI1>, > + <&ccu CLK_USB_OHCI1>; > + resets = <&ccu RST_BUS_OHCI1>, > + <&ccu RST_BUS_EHCI1>;
Why do you need to take the OHCI resources too?
Maxime
-- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com[unhandled content-type:application/pgp-signature] |  |