lkml.org 
[lkml]   [2017]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v6 2/3] arm: dts: add Nuvoton NPCM750 device tree
On 20 September 2017 at 00:40, Brendan Higgins
<brendanhiggins@google.com> wrote:
> Add a common device tree for all Nuvoton NPCM750 BMCs and a board
> specific device tree for the NPCM750 (Poleg) evaluation board.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
> Reviewed-by: Avi Fishman <avifishman70@gmail.com>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> Tested-by: Tomer Maimon <tmaimon77@gmail.com>
> Tested-by: Avi Fishman <avifishman70@gmail.com>
> ---
> .../arm/cpu-enable-method/nuvoton,npcm7xx-smp | 42 ++++
> .../devicetree/bindings/arm/npcm/npcm.txt | 6 +
> arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 48 +++++
> arch/arm/boot/dts/nuvoton-npcm750.dtsi | 211 +++++++++++++++++++++
> include/dt-bindings/clock/nuvoton,npcm7xx-clks.h | 39 ++++
> 5 files changed, 346 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
> create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
> create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi
> create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
>
> diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
> new file mode 100644
> index 000000000000..e81f85b400cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
> @@ -0,0 +1,42 @@
> +=========================================================
> +Secondary CPU enable-method "nuvoton,npcm7xx-smp" binding
> +=========================================================
> +
> +To apply to all CPUs, a single "nuvoton,npcm7xx-smp" enable method should be
> +defined in the "cpus" node.
> +
> +Enable method name: "nuvoton,npcm7xx-smp"
> +Compatible machines: "nuvoton,npcm750"
> +Compatible CPUs: "arm,cortex-a9"
> +Related properties: (none)
> +
> +Note:
> +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
> +"nuvoton,npcm750-gcr".
> +
> +Example:
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "nuvoton,npcm7xx-smp";
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <0>;
> + next-level-cache = <&L2>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <1>;
> + next-level-cache = <&L2>;
> + };
> + };
> +
> diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
> new file mode 100644
> index 000000000000..2d87d9ecea85
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
> @@ -0,0 +1,6 @@
> +NPCM Platforms Device Tree Bindings
> +-----------------------------------
> +NPCM750 SoC
> +Required root node properties:
> + - compatible = "nuvoton,npcm750";
> +
> diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> new file mode 100644
> index 000000000000..a0675e584125
> --- /dev/null
> +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> @@ -0,0 +1,48 @@
> +/*
> + * DTS file for all NPCM750 SoCs
> + *
> + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "nuvoton-npcm750.dtsi"
> +
> +/ {
> + model = "Nuvoton npcm750 Development Board (Device Tree)";
> + compatible = "nuvoton,npcm750";
> +
> + chosen {
> + stdout-path = &serial3;
> + };
> +
> + memory {
> + reg = <0 0x40000000>;
> + };
> +};
> +
> +&watchdog1 {
> + status = "okay";
> +};
> +
> +&serial0 {
> + status = "okay";
> +};
> +
> +&serial1 {
> + status = "okay";
> +};
> +
> +&serial2 {
> + status = "okay";
> +};
> +
> +&serial3 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
> new file mode 100644
> index 000000000000..5d8a48e44274
> --- /dev/null
> +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
> @@ -0,0 +1,211 @@
> +/*
> + * DTSi file for the NPCM750 SoC
> + *
> + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/nuvoton,npcm7xx-clks.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "nuvoton,npcm7xx-smp";
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <0>;
> + next-level-cache = <&l2>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <1>;
> + next-level-cache = <&l2>;
> + };
> + };
> +
> + gcr: gcr@f0800000 {
> + compatible = "nuvoton,npcm750-gcr", "syscon",
> + "simple-mfd";
> + reg = <0xf0800000 0x1000>;
> + };
> +
> + scu: scu@f03fe000 {
> + compatible = "arm,cortex-a9-scu";
> + reg = <0xf03fe000 0x1000>;
> + };
> +
> + l2: cache-controller@f03fc000 {
> + compatible = "arm,pl310-cache";
> + reg = <0xf03fc000 0x1000>;
> + interrupts = <0 21 4>;
> + cache-unified;
> + cache-level = <2>;
> + clocks = <&clk NPCM7XX_CLK_AXI>;
> + };
> +
> + gic: interrupt-controller@f03ff000 {
> + compatible = "arm,cortex-a9-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0xf03ff000 0x1000>,
> + <0xf03fe100 0x100>;
> + };
> +
> + timer@f03fe600 {
> + compatible = "arm,cortex-a9-twd-timer";
> + reg = <0xf03fe600 0x20>;
> + interrupts = <1 13 0x304>;
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + };
> +
> + ahb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges = <0x80000000 0x80000000 0x40000000
> + 0xc0000000 0xc0000000 0x00002000
> + 0xc0008000 0xc0008000 0x00001000
> + 0xe0800000 0xe0800000 0x00001000
> + 0xe1000000 0xe1000000 0x00001000
> + 0xe8000000 0xe8000000 0x08000000
> + /* APB start */
> + 0xf0000000 0xf0000000 0x00005000
> + 0xf0007000 0xf0007000 0x00005000
> + 0xf0010000 0xf0010000 0x00008000
> + 0xf0080000 0xf0080000 0x00010000
> + 0xf009f000 0xf009f000 0x00001000
> + 0xf0100000 0xf0100000 0x00005000
> + 0xf0180000 0xf0180000 0x0000b000
> + 0xf0200000 0xf0200000 0x00002000
> + /* APB end */
> + 0xf0800000 0xf0800000 0x000fc000
> + 0xf8000000 0xf8000000 0x02000000
> + 0xfb000000 0xfb000000 0x00002000>;
> +
> + clk: clock-controller@f0801000 {
> + compatible = "nuvoton,npcm750-clk";
> + #clock-cells = <1>;
> + reg = <0xf0801000 0x1000>;
> + status = "okay";
> + };
> +
> + /* external clock signal rg1refck, supplied by the phy */
> + clk-rg1refck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + /* external clock signal rg2refck, supplied by the phy */
> + clk-rg2refck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + clk-xin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + };
> +
> + apb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges = <0xf0000000 0xf0000000 0x00005000
> + 0xf0007000 0xf0007000 0x00005000
> + 0xf0010000 0xf0010000 0x00008000
> + 0xf0080000 0xf0080000 0x00010000
> + 0xf009f000 0xf009f000 0x00001000
> + 0xf0100000 0xf0100000 0x00005000
> + 0xf0180000 0xf0180000 0x0000b000
> + 0xf0200000 0xf0200000 0x00002000>;
> +
> + timer0: timer@f0000000 {
> + compatible = "nuvoton,npcm750-timer";
> + interrupts = <0 32 4>;
> + reg = <0xf0000000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + };

I started the upstream process of NPCM7xx clocksource driver, I got
the following comment:
https://www.spinics.net/lists/devicetree/msg197916.html

Is it possible to modify the the timer DT entry to:

timer0: timer@f0008000 {
compatible = "nuvoton,npcm7xx-timer";
interrupts = <0 32 4>;
reg = <0xf0008000 0x1000>;
clocks = <&clk NPCM7XX_CLK_TIMER>;
};

> +
> + watchdog0: watchdog@f0008000 {
> + compatible = "nuvoton,npcm750-wdt";
> + interrupts = <0 47 4>;
> + reg = <0xf0008000 0x1000>;
> + status = "disabled";
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + };
> +
> + watchdog1: watchdog@f0009000 {
> + compatible = "nuvoton,npcm750-wdt";
> + interrupts = <0 48 4>;
> + reg = <0xf0009000 0x1000>;
> + status = "disabled";
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + };
> +
> + watchdog2: watchdog@f000a000 {
> + compatible = "nuvoton,npcm750-wdt";
> + interrupts = <0 49 4>;
> + reg = <0xf000a000 0x1000>;
> + status = "disabled";
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + };
> +
> + serial0: serial0@f0001000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0001000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + interrupts = <0 2 4>;
> + status = "disabled";
> + };
> +
> + serial1: serial1@f0002000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0002000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + interrupts = <0 3 4>;
> + status = "disabled";
> + };
> +
> + serial2: serial2@f0003000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0003000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + interrupts = <0 4 4>;
> + status = "disabled";
> + };
> +
> + serial3: serial3@f0004000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0004000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + interrupts = <0 5 4>;
> + status = "disabled";
> + };
> + };
> + };
> +};
> diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
> new file mode 100644
> index 000000000000..c69d3bbf7e42
> --- /dev/null
> +++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2016 Nuvoton Technologies, tali.perry@nuvoton.com
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_NPCM7XX_H
> +#define _DT_BINDINGS_CLK_NPCM7XX_H
> +
> +#define NPCM7XX_CLK_PLL0 0
> +#define NPCM7XX_CLK_PLL1 1
> +#define NPCM7XX_CLK_PLL2 2
> +#define NPCM7XX_CLK_GFX 3
> +#define NPCM7XX_CLK_APB1 4
> +#define NPCM7XX_CLK_APB2 5
> +#define NPCM7XX_CLK_APB3 6
> +#define NPCM7XX_CLK_APB4 7
> +#define NPCM7XX_CLK_APB5 8
> +#define NPCM7XX_CLK_MC 9
> +#define NPCM7XX_CLK_CPU 10
> +#define NPCM7XX_CLK_SPI0 11
> +#define NPCM7XX_CLK_SPI3 12
> +#define NPCM7XX_CLK_SPIX 13
> +#define NPCM7XX_CLK_UART_CORE 14
> +#define NPCM7XX_CLK_TIMER 15
> +#define NPCM7XX_CLK_HOST_UART 16
> +#define NPCM7XX_CLK_MMC 17
> +#define NPCM7XX_CLK_SDHC 18
> +#define NPCM7XX_CLK_ADC 19
> +#define NPCM7XX_CLK_GFX_MEM 20
> +#define NPCM7XX_CLK_USB_BRIDGE 21
> +#define NPCM7XX_CLK_AXI 22
> +#define NPCM7XX_CLK_AHB 23
> +#define NPCM7XX_CLK_EMC 24
> +#define NPCM7XX_CLK_GMAC 25
> +
> +#endif
> --
> 2.14.1.690.gbb1197296e-goog

Thanks!

\
 
 \ /
  Last update: 2017-10-29 21:34    [W:0.078 / U:3.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site