lkml.org 
[lkml]   [2017]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] i2c: xgene-slimpro: Support v2
From
Date
On Sat, 2017-10-28 at 14:11 +0200, Wolfram Sang wrote:
> Thanks for the patch!
>
> On Mon, Oct 23, 2017 at 03:12:20PM -0700, Hoan Tran wrote:
> > This patch supports xgene-slimpro-i2c v2 which uses the non-cachable
> > memory
> > as the PCC shared memory.
> >
> > Signed-off-by: Hoan Tran <hotran@apm.com>
>
> I can't tell if __force is justified here but I don't know much about
> ACPI... Andy, can you have a look?

Few comments to the patch as well.

> > +#ifdef CONFIG_ACPI
> > +static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
> > + {"APMC0D40", XGENE_SLIMPRO_I2C_V1},
> > + {"APMC0D8B", XGENE_SLIMPRO_I2C_V2},
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);
> > +#endif

No need to move this here...

> > +
> > static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
> > {
> > struct slimpro_i2c_dev *ctx;
> > @@ -476,6 +490,17 @@ static int xgene_slimpro_i2c_probe(struct
> > platform_device *pdev)
> > }
> > } else {
> > struct acpi_pcct_hw_reduced *cppc_ss;
> > + int version = XGENE_SLIMPRO_I2C_V1;
> > +#ifdef CONFIG_ACPI

Do you really need this ifdef?

> > + const struct acpi_device_id *acpi_id;
> > +
> > + acpi_id =
> > acpi_match_device(xgene_slimpro_i2c_acpi_ids,

... you may get pointer to id table via pdev.

> > + &pdev->dev);
> > + if (!acpi_id)
> > + return -EINVAL;
> > +
> > + version = (int)acpi_id->driver_data;
> > +#endif

> > if (ctx->comm_base_addr) {
> > - ctx->pcc_comm_addr = memremap(ctx-
> > >comm_base_addr,
> > - cppc_ss-
> > >length,
> > - MEMREMAP_WB);
> > + if (version == XGENE_SLIMPRO_I2C_V2)
> > + ctx->pcc_comm_addr = (void __force
> > *)ioremap(
> > + ctx-
> > >comm_base_addr,
> > + cppc_ss-
> > >length);

Commit message actually doesn't explain why we switch to iomap over
memmap.

(__force here is obviously to suppress __iomap annotation for mapped
memory)

If you need non-cacheable MEMREMAP_WT I guess will do a job.

> > + else
> > + ctx->pcc_comm_addr = memremap(
> > + ctx-
> > >comm_base_addr,
> > + cppc_ss-
> > >length,
> > + MEMREMAP_WB
> > );

--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

\
 
 \ /
  Last update: 2017-10-28 21:38    [W:0.063 / U:2.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site