lkml.org 
[lkml]   [2016]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v2 1/3] dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq
Date
Add the binding document for the new brcmstb-avs-cpufreq driver.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
.../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt | 77 ++++++++++++++++++++++
MAINTAINERS | 7 ++
2 files changed, 84 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
new file mode 100644
index 0000000..d9ad3d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -0,0 +1,77 @@
+Broadcom STB AVS CPUfreq driver bindings
+========================================
+
+A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
+references the mailbox register used to communicate with the AVS CPU[1]. The
+second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
+the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
+command sent to it by a driver. Interrupting the AVS CPU is mandatory for
+commands to be processed.
+
+The interface also requires a reference to the AVS host interrrupt
+controller, so a driver can react to interrupts generated by the AVS CPU
+whenever a command has been processed. See [2] for more information on the
+brcm,l2-intc node.
+
+[1] The AVS CPU is an independent co-processor that runs proprietary
+firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
+Adaptive Voltage Scaling.
+
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+
+
+Node brcm,avs-cpu-data-mem
+--------------------------
+
+Required properties:
+- compatible: Sould be one of: brcm,avs-cpu-data-mem,
+ brcm,bcm7271-avs-cpu-data-mem or brcm,bcm7268-avs-cpu-data-mem
+- reg: Specifies base physical address and size of the registers.
+- interrupts: The interrupt that the AVS CPU will use to interrupt the host
+ when a command completed.
+- interrupt-parent: The interrupt controller the above interrupt is routed
+ through.
+- interrupt-names: The name of the interrupt used to interrupt the host.
+
+Optional properties:
+- None
+
+Node brcm,avs-cpu-l2-intr
+-------------------------
+
+Required properties:
+- compatible: Sould be one of: brcm,avs-cpu-l2-intr,
+ brcm,bcm7271-avs-cpu-l2-intr or brcm,bcm7268-avs-cpu-l2-intr
+- reg: Specifies base physical address and size of the registers.
+
+Optional properties:
+- None
+
+
+Example
+=======
+
+ avs_host_l2_intc: interrupt-controller@f04d1200 {
+ #interrupt-cells = <1>;
+ compatible = "brcm,l2-intc";
+ interrupt-parent = <&intc>;
+ reg = <0xf04d1200 0x48>;
+ interrupt-controller;
+ interrupts = <0x0 0x19 0x0>;
+ interrupt-names = "avs";
+ };
+
+ avs-cpu-data-mem@f04c4000 {
+ compatible = "brcm,bcm7271-avs-cpu-data-mem",
+ "brcm,avs-cpu-data-mem";
+ reg = <0xf04c4000 0x60>;
+ interrupts = <0x1a>;
+ interrupt-parent = <&avs_host_l2_intc>;
+ interrupt-names = "sw_intr";
+ };
+
+ avs-cpu-l2-intr@f04d1100 {
+ compatible = "brcm,bcm7271-avs-cpu-l2-intr",
+ "brcm,avs-cpu-l2-intr";
+ reg = <0xf04d1100 0x10>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 20bb1d0..557f839 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2689,6 +2689,13 @@ L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/brcmnand/

+BROADCOM STB AVS CPUFREQ DRIVER
+M: Markus Mayer <mmayer@broadcom.com>
+M: bcm-kernel-feedback-list@broadcom.com
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
M: Rafał Miłecki <zajec5@gmail.com>
L: linux-wireless@vger.kernel.org
--
2.7.4
\
 
 \ /
  Last update: 2016-09-30 23:58    [W:0.108 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site