lkml.org 
[lkml]   [2016]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] ARM: davinci: da850-lcdk: add support for tilcdc
Date
This series enables the tilcdc support for da850-lcdk. Besides the
device tree changes it contains some tweaks needed to make it work.

Tested with a da850-lcdk board with an LCD display connected over
VGA with the following modes:

modetest -M tilcdc -s 26:800x600@RG16
modetest -M tilcdc -s 26:1024x768@RG16

Rebased on top of some necessary changes in the tilcdc drm driver.
These changes will go upstream through the drm tree.

Bartosz Golaszewski (3):
ARM: dts: da850-lcdk: add support for 1024x768 resolution
ARM: davinci: enable the LCDC DRM driver in defconfig
ARM: da850: adjust memory settings for tilcdc

Karl Beldan (3):
ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for lcdc
ARM: dts: da850: add a node for the LCD controller
ARM: dts: da850-lcdk: enable the LCD controller

arch/arm/boot/dts/da850-lcdk.dts | 71 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/da850.dtsi | 8 ++++
arch/arm/configs/davinci_all_defconfig | 2 +
arch/arm/mach-davinci/da8xx-dt.c | 44 ++++++++++++++++++
arch/arm/mach-davinci/include/mach/da8xx.h | 4 ++
5 files changed, 129 insertions(+)

--
2.7.4

\
 
 \ /
  Last update: 2016-09-29 18:33    [W:0.148 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site