[lkml]   [2016]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/7] i2c: bcm2835: Bring in changes from downstream
This patchset tries to bring in the lessons learned in the downstream
driver i2c-bcm2708. The downstream clock stretcing timeout patch has
been left out since clock stretching is broken/unreliable on this
controller, so no point in setting it.

Changes since version 2:
- use dev_dbg instead for transfer errors
- drop i2c2 disabling patch, vc4 uses it.


Noralf Trønnes (7):
i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
i2c: bcm2835: Protect against unexpected TXW/RXR interrupts
i2c: bcm2835: Use dev_dbg logging on transfer errors
i2c: bcm2835: Can't support I2C_M_IGNORE_NAK
i2c: bcm2835: Add support for Repeated Start Condition
i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT
i2c: bcm2835: Add support for dynamic clock

drivers/i2c/busses/i2c-bcm2835.c | 209 ++++++++++++++++++++++++---------------
1 file changed, 130 insertions(+), 79 deletions(-)


 \ /
  Last update: 2016-09-28 19:54    [W:0.093 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site