lkml.org 
[lkml]   [2016]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
On Wed, Sep 14, 2016 at 4:06 AM, Fabio Estevam <festevam@gmail.com> wrote:
> On Sun, Sep 11, 2016 at 3:30 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
>
>> + reg_3p3v: regulator-3p3v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "3P3V";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>
> You should remove " regulator-boot-on" and "regulator-always-on" as
> the reg_3p3v regulator is controlled by the can nodes.

OK, but where it showed on the processor manual? I only find LDO_2P5
regulator which is connected to high speed devices, HDMI, SATA etc on
Figure 50-1: Power system overview

thanks!
--
Jagan Teki
Free Software Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.064 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site