lkml.org 
[lkml]   [2016]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/4] Add support for cros-ec-sensors
From
Date
On 21/08/16 20:57, Jonathan Cameron wrote:
> On 16/08/16 13:49, Lee Jones wrote:
>> On Mon, 15 Aug 2016, Jonathan Cameron wrote:
>>
>>> On 01/08/16 10:54, Enric Balletbo i Serra wrote:
>>>> Hi,
>>>>
>>>> This is the four patchset to add support for the sensors behind the ChromeOS
>>>> Embedded Controller.
>>>>
>>>> This version has only the patches to support common functions and 3d
>>>> contiguous sensors like Accelerometers, Gyroscope and Magnetometer that are
>>>> presented by the ChromeOS EC Sensor hub. The patches were tested on an Oak board.
>>>>
>>>> The code was checked out from the ChromeOS v3.18 tree and forward ported to
>>>> mainline solving all the conflicts and build issues. I splitted the code in
>>>> single patches that have sense by themselves in order to avoid the chances
>>>> to fail.
>>>>
>>>> Note that the patches depends on this [1] to apply and work.
>>>>
>>>> [1] https://lkml.org/lkml/2016/7/1/188
>>> Given this dependency I'm assuming the best route for these is via
>>> the MFD tree...
>>>
>>> Lee, shout if you want them to go a different route.
>>
>> IIO looks like a more suitable route. Please provide me with a
>> pull-request base off of an immutable tag.
> Hi Lee,
>
> As far as I can tell the precursor patch above hasn't gone in your
> tree yet which leaves me unable to take this through IIO for now.
>
> Maybe I'm missing something!
>
> Jonathan

Hi Lee,

Any movement on the dependency above?

Last I can find was you adding your ack to it:
[PATCH v2 1/2] mfd: cros_ec: Add MKBP event support

https://lkml.org/lkml/2016/8/16/423

Jonathan
>>
>>>> Waiting for your reviews and feedback.
>>>>
>>>> Changes since v3 (requested by Guenter Roeck)
>>>> - Convert structure to a simple array
>>>> - Remove PM declarations
>>>> - Remove unnecessary initializations
>>>> - cros_ec_sensors_cmd_read_u16: Conversion should only be done if ret >= 0
>>>> - Remove unnecessary else
>>>> - Add Reviewed-by tag for two last patches.
>>>>
>>>> Changes since v2 (requested by Guenter Roeck and Jonhatan Cameron)
>>>> - Rebased and fix build error.
>>>> - Include a list of possible values in the description of location attr.
>>>> - Fix some typos.
>>>> - Remove id sysfs entry.
>>>> - Skip filling by zero structure parameters that already zero'd.
>>>> - Order includes alphabetically.
>>>> - Propagate error codes.
>>>>
>>>> Changes since v1 (requested by Peter Meerwald-Stadler and Jonhatan Cameron)
>>>> - Check kernel-doc documentation and
>>>> - Bring some patches together.
>>>> - Fix some spelling mistakes.
>>>> - Include ABI documentation.
>>>> - Be more careful with buffer sizes (sprintf -> snprintf)
>>>> - Add cros_ec_sensors prefix to all function.
>>>> - Check return values on some functions.
>>>>
>>>> Best regards,
>>>>
>>>> Enric Balletbo i Serra (3):
>>>> iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC
>>>> Sensor Hub.
>>>> iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
>>>> platform/chrome: cros_ec_dev - Register cros-ec sensors
>>>>
>>>> Vincent Palatin (1):
>>>> platform/chrome: Introduce a new function to check EC features.
>>>>
>>>> Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 18 +
>>>> drivers/iio/common/Kconfig | 1 +
>>>> drivers/iio/common/Makefile | 1 +
>>>> drivers/iio/common/cros_ec_sensors/Kconfig | 22 +
>>>> drivers/iio/common/cros_ec_sensors/Makefile | 6 +
>>>> .../iio/common/cros_ec_sensors/cros_ec_sensors.c | 322 +++++++++++++++
>>>> .../common/cros_ec_sensors/cros_ec_sensors_core.c | 450 +++++++++++++++++++++
>>>> .../common/cros_ec_sensors/cros_ec_sensors_core.h | 175 ++++++++
>>>> drivers/platform/chrome/cros_ec_dev.c | 159 ++++++++
>>>> include/linux/mfd/cros_ec.h | 10 +
>>>> include/linux/mfd/cros_ec_commands.h | 183 ++++++++-
>>>> 11 files changed, 1342 insertions(+), 5 deletions(-)
>>>> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cros-ec
>>>> create mode 100644 drivers/iio/common/cros_ec_sensors/Kconfig
>>>> create mode 100644 drivers/iio/common/cros_ec_sensors/Makefile
>>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
>>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
>>>>
>>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.157 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site