lkml.org 
[lkml]   [2016]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] ARM: tegra: nyan: Use proper IRQ type definitions
Date
This switches a few interrupt definitions that were using
GPIO_ACTIVE_HIGH as IRQ type, which is invalid.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
arch/arm/boot/dts/tegra124-nyan.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 271505e..30a77ec 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -59,7 +59,7 @@
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
};

temperature-sensor@4c {
@@ -325,7 +325,7 @@
reg = <0x9>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(J, 0)
- GPIO_ACTIVE_HIGH>;
+ IRQ_TYPE_EDGE_BOTH>;
ti,ac-detect-gpios = <&gpio
TEGRA_GPIO(J, 0)
GPIO_ACTIVE_HIGH>;
--
2.9.3
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.100 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site