lkml.org 
[lkml]   [2016]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/7] clk: rockchip: rk3399: export 480M_SRC clock id for usbphy0/usbphy1
From
Date
Hi Heiko,

On 2016/8/8 17:55, Frank Wang wrote:
> Hi Heiko,
>
> On 2016/8/6 0:05, Heiko Stübner wrote:
>> Hi Frank,
>>
>> Am Freitag, 5. August 2016, 16:34:42 schrieb Frank Wang:
>>> On 2016/8/5 3:10, Heiko Stübner wrote:
>>>> Am Dienstag, 2. August 2016, 15:19:56 schrieb Xing Zheng:
>>>>> Export these source clocks for usbphy.
>>>>>
>>>>> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
>>>> can you please provide a rationale why you need manual control over
>>>> that
>>>> intermediate clock?
>>> Well, From below graph, you can see that 'clk_usbphyX_480m' is
>>> generated
>>> from usb2phy, and 'clk_usbphy_480m' which select from
>>> clk_usbphyX_480m_src via a gate (G13[12]) provided 480M clock to other
>>> modules.
>>>
>>> xin24m
>>> |__ clk_usb2phy0_ref
>>> | |
>>> | |__ clk_usbphy0_480m
>>> | |
>>> | |__clk_usbphy0_480m_src
>>> | |
>>> | |__clk_usbphy_480m
>>> | |__ ... ...
>>> |
>>> |__ clk_usb2phy1_ref
>>> |
>>> |__ clk_usbphy1_480m
>>> |
>>> |__clk_usbphy1_480m_src
>>>> The two usbphys seem to use the clk_usb2phyX_ref clocks, generate the
>>>> 480m
>>>> clocks, but do not seem to need the clk_usbphyX_480m_src gates.
>>> Yeah, they used to be. However, the story went something like this,
>>>
>>> Some PM suspend process related ehci/ohci controller are base on 480m
>>> clocks, unfortunately, usb2-phy suspended earlier than ehci/ohci
>>> (usb2-phy will be auto suspended if no devices plug-in), and the
>>> clk-480m provided by it was disabled if no module used. As a result,
>>> the
>>> PM suspend process was blocked when it run into ehci/ohci module.
>> ah, so the ehci controller needs that 480m clock as well? Do you
>> happen to
>> have example patches for the ehci/ohci side already? I'd like to peak
>> at what
>> you mean with "some PM suspend process related" things.
>
> Actually, no patches for it, I just make below steps manually :-).
> 1. set two usb2-phy into suspend mode.
> 2. disable 480m clock on each usb2-phy (assume only usb2-phy used it).
> 3. press power button let system into PM suspend.
>
> Then, the kernel will be blocked and you can see the following log
> from console.
> ... ....
> [ 123.763848] calling usb6+ @ 166, parent: xhci-hcd.0.auto
> [ 123.764503] call usb6+ returned 0 after 163 usecs
> [ 123.765106] calling usb5+ @ 166, parent: xhci-hcd.0.auto
> [ 123.765719] call usb5+ returned 0 after 121 usecs
> [ 123.766294] calling usb4+ @ 166, parent: fe3e0000.usb
> [ 123.766917] calling usb3+ @ 55, parent: fe3a0000.usb
>

May I know have you tried reproducing on your board or not?

>>
>> Depending on what is actually needed, you could also pull the usbphy
>> out of
>> autosuspend in a pm-prepare callback of the phy driver itself ... see
>> http://lxr.free-electrons.com/source/include/linux/pm.h#L86
>>
>> Like
>> - in the .prepare callback make sure to unsuspend the phy
>> and deactivate the autosuspend
>> - ehci/ohci will poweroff the phy in it s suspend callback (already
>> does that)
>
> Hmm, do you remember that we have previously discussed there are some
> oddities in ehci/ohci driver? phy_power_on() gets called twice at
> ehci/ohci driver probe time, one is at pdata->power_on(); another is
> at usb_add_hcd(), then the power_count of phy increases to 2, but
> phy_power_off() is just invoked one time when ehci/ohci goes to PM
> suspend, so phy->ops->power_off is never be invoked.
>
> In this way, the usb-phy maybe never go to suspend.
>
>> - suspend -> resume
>> - ehci/ohci will poweron the phy
>> - in the phy's .complete callback you can reactivate the autosuspend
>> timer
>>
>> Because it looks more like you actually need the phy and not the
>> clock alone.
>> So it would be nicer to use mechanisms already in place instead of
>> creating
>> new dependencies.
>>
>
> Theoretically, phy_init() will be invoked when ehci/ohci power on, and
> the sm_work will be reactivated (have already implemented) in
> phy->ops->init, but unfortunately, the same issue as phy_power_on()
> mentioned above, it never run there too .
>

Would you like to give some comments on above two oddities please?

BR.
Frank

>>> Hence, we are planing to refer clk_usbphyX_480m_src into each ehci/ohci
>>> driver. Maybe you will challenge why not refer clk_usbphy_480m
>>> directly?
>>> because there are two ehci/ohci connected in the different usb2phy, and
>>> only one clk_usbphy_480m clock was selected in clock tree.
>> Nope, no argument from me as I fully understand that each phy
>> provides its own
>> 480m clock :-) .
>>
>>
>> Heiko
>>
>>

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.063 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site