lkml.org 
[lkml]   [2016]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i.MX6 PCIe: Fix imx6_pcie_deassert_core_reset() polarity
Krzysztof Hałasa <khalasa@piap.pl> [2016-03-25 14:32:35]:

Cześć,

> I wonder if all boards (except maybe that Toradex set) use an active-low
> PCIe reset and are now broken. Perhaps Toradex uses active-high and thus
> works.

I'm really puzzled by this :-) With your patch applied I get following on
Toradex Apalis modules:

DTS: reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
dmesg: imx6q-pcie 1ffc000.pcie: phy link never came up
gpio: gpio-28 ( |reset ) out hi
pin voltage: 0V

DTS: reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
dmesg: ath9k 0000:01:00.0: enabling device (0140 -> 0142)
gpio: gpio-28 ( |reset ) out lo
pin voltage: 3V3

So Toradex Apalis is actually active-high? Thanks.

-- ynezz

\
 
 \ /
  Last update: 2016-03-30 15:01    [W:0.156 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site