lkml.org 
[lkml]   [2016]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 20/31] scsi: use parity32 in isci/phy.c
From
Date
From: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>

Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
---
drivers/scsi/isci/phy.c | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index cb87b2e..0b87ff4 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -122,8 +122,6 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
int phy_idx = iphy->phy_index;
struct sci_phy_cap phy_cap;
u32 phy_configuration;
- u32 parity_check = 0;
- u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
u32 sp_timeouts = 0;
@@ -223,19 +221,11 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
}

/* The SAS specification indicates that the phy_capabilities that
- * are transmitted shall have an even parity. Calculate the parity.
+ * are transmitted shall have an even parity. If parity indicates
+ * there are an odd number of bits set, then set the parity bit
+ * to 1 in the phy capabilities.
*/
- parity_check = phy_cap.all;
- while (parity_check != 0) {
- if (parity_check & 0x1)
- parity_count++;
- parity_check >>= 1;
- }
-
- /* If parity indicates there are an odd number of bits set, then
- * set the parity bit to 1 in the phy capabilities.
- */
- if ((parity_count % 2) != 0)
+ if (parity32(phy_cap.all))
phy_cap.parity = 1;

writel(phy_cap.all, &llr->phy_capabilities);
--
2.5.5
\
 
 \ /
  Last update: 2016-03-27 09:41    [W:0.690 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site