lkml.org 
[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
Date
From
SubjectRe: usb: gadget breakage on N900: bind UDC by name passed via usb_gadget_driver structure
Hi!

> OK, so at last I finished charging of my N900; found 1.8V USB
> to UART adapter and soldered it to the phone.
>
> I managed to boot N900 with working USB gadget (builtin g_ether)
> in boardfile mode, can ping it from PC and transfer data. I don't
> see any issue (except of musb name issue in twl phy driver, I've
> already sent a fix for that: https://lkml.org/lkml/2016/3/24/670 )
>
> Pavel, I still don't see how you've got your issue, please share
> more detials

And for completenes, this is (reverted) patch that fixes the issue for
me. Hmm. That looks a bit too big.

Doing the revert, and PC is happy: first we boot from NOLO, then Linux
boots and we detect USB gadget.

Best regards,
Pavel

[258134.206143] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=5
[258134.206149] usb 1-1: Product: Nokia N900 (Update mode)
[258134.206154] usb 1-1: Manufacturer: Nokia
[258134.206158] usb 1-1: SerialNumber: 4D554D333032393332
[258135.695868] usb 1-1: USB disconnect, device number 97
[258144.192099] usb 1-1: new high-speed USB device number 98 using
ehci-pci
[258144.326465] usb 1-1: New USB device found, idVendor=0421,
idProduct=01c7
[258144.326474] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[258144.326479] usb 1-1: Product: N900 (Storage Mode)
[258144.326482] usb 1-1: Manufacturer: Nokia
[258144.326486] usb 1-1: SerialNumber: 372041756775
[258144.330518] usb-storage 1-1:1.0: USB Mass Storage device detected
[258144.331737] scsi host14: usb-storage 1-1:1.0
[258145.333287] scsi 14:0:0:0: Direct-Access Nokia N900
031 PQ: 0 ANSI: 2
[258145.337226] sd 14:0:0:0: Attached scsi generic sg1 type 0
[258145.343359] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[258145.343717] scsi 14:0:0:1: Direct-Access Nokia N900
031 PQ: 0 ANSI: 2
[258145.347245] sd 14:0:0:1: Attached scsi generic sg2 type 0
[258145.352379] sd 14:0:0:1: [sdc] Attached SCSI removable disk
pavel@duo:/data/l/linux-n900$



Best regards,
Pavel

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 9708cf5..ce18f57 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -34,7 +34,7 @@
#include <linux/usb/otg.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
-#include <linux/usb/musb.h>
+#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
@@ -148,10 +148,10 @@
* If VBUS is valid or ID is ground, then we know a
* cable is present and we need to be runtime-enabled
*/
-static inline bool cable_present(enum musb_vbus_id_status stat)
+static inline bool cable_present(enum omap_musb_vbus_id_status stat)
{
- return stat == MUSB_VBUS_VALID ||
- stat == MUSB_ID_GROUND;
+ return stat == OMAP_MUSB_VBUS_VALID ||
+ stat == OMAP_MUSB_ID_GROUND;
}

struct twl4030_usb {
@@ -170,7 +170,7 @@ struct twl4030_usb {
enum twl4030_usb_mode usb_mode;

int irq;
- enum musb_vbus_id_status linkstat;
+ enum omap_musb_vbus_id_status linkstat;
bool vbus_supplied;

struct delayed_work id_workaround_work;
@@ -276,11 +276,11 @@ static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
}

-static enum musb_vbus_id_status
+static enum omap_musb_vbus_id_status
twl4030_usb_linkstat(struct twl4030_usb *twl)
{
int status;
- enum musb_vbus_id_status linkstat = MUSB_UNKNOWN;
+ enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;

twl->vbus_supplied = false;

@@ -306,14 +306,14 @@ static enum musb_vbus_id_status
}

if (status & BIT(2))
- linkstat = MUSB_ID_GROUND;
+ linkstat = OMAP_MUSB_ID_GROUND;
else if (status & BIT(7))
- linkstat = MUSB_VBUS_VALID;
+ linkstat = OMAP_MUSB_VBUS_VALID;
else
- linkstat = MUSB_VBUS_OFF;
+ linkstat = OMAP_MUSB_VBUS_OFF;
} else {
- if (twl->linkstat != MUSB_UNKNOWN)
- linkstat = MUSB_VBUS_OFF;
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN)
+ linkstat = OMAP_MUSB_VBUS_OFF;
}

dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
@@ -532,47 +532,10 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
}
static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);

-static ssize_t twl4030_test_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct twl4030_usb *twl = dev_get_drvdata(dev);
- int ret = -EINVAL;
-
- mutex_lock(&twl->lock);
- ret = sprintf(buf, "%s\n", "hello, world");
- mutex_unlock(&twl->lock);
-
- return ret;
-}
-
-static int twl4030_shutdown(struct twl4030_usb *twl);
-
-static ssize_t twl4030_test_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- unsigned long tmp;
-
- struct twl4030_usb *twl = dev_get_drvdata(dev);
-
- mutex_lock(&twl->lock);
- sscanf(buf, "%lX", &tmp);
- printk("TWL HACK: tmp = 0x%lX\n", tmp);
- mutex_unlock(&twl->lock);
-
- if (tmp == 0xdead) {
- printk("TWL HACK: killing hardware\n");
- printk("TWL HACK: killing hardware = %d\n", twl4030_shutdown(twl));
- }
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(test, 0664, twl4030_test_show, twl4030_test_store);
-
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
struct twl4030_usb *twl = _twl;
- enum musb_vbus_id_status status;
+ enum omap_musb_vbus_id_status status;
bool status_changed = false;

status = twl4030_usb_linkstat(twl);
@@ -604,11 +567,11 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
}
- musb_mailbox(status);
+ omap_musb_mailbox(status);
}

/* don't schedule during sleep - irq works right then */
- if (status == MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
+ if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
cancel_delayed_work(&twl->id_workaround_work);
schedule_delayed_work(&twl->id_workaround_work, HZ);
}
@@ -707,7 +670,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
twl->vbus_supplied = false;
- twl->linkstat = MUSB_UNKNOWN;
+ twl->linkstat = OMAP_MUSB_UNKNOWN;

twl->phy.dev = twl->dev;
twl->phy.label = "twl4030";
@@ -747,15 +710,11 @@ static int twl4030_usb_probe(struct platform_device *pdev)
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");

- if (device_create_file(&pdev->dev, &dev_attr_test))
- dev_warn(&pdev->dev, "could not create sysfs file #2\n");
-
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);

pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);

/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
@@ -775,7 +734,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
}

if (pdata)
- err = phy_create_lookup(phy, "usb", "musb-hdrc.0");
+ err = phy_create_lookup(phy, "usb", "musb-hdrc.0.auto");
if (err)
return err;

@@ -786,24 +745,18 @@ static int twl4030_usb_probe(struct platform_device *pdev)
return 0;
}

-static int twl4030_shutdown(struct twl4030_usb *twl)
+static int twl4030_usb_remove(struct platform_device *pdev)
{
+ struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;

- usb_remove_phy(&twl->phy);
pm_runtime_get_sync(twl->dev);
cancel_delayed_work(&twl->id_workaround_work);
+ device_remove_file(twl->dev, &dev_attr_vbus);

/* set transceiver mode to power on defaults */
twl4030_usb_set_mode(twl, -1);

- /* idle ulpi before powering off */
- if (cable_present(twl->linkstat))
- pm_runtime_put_noidle(twl->dev);
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_sync_suspend(twl->dev);
- pm_runtime_disable(twl->dev);
-
/* autogate 60MHz ULPI clock,
* clear dpll clock request for i2c access,
* disable 32KHz
@@ -818,18 +771,12 @@ static int twl4030_shutdown(struct twl4030_usb *twl)
/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);

- return 0;
-}
-
-
-static int twl4030_usb_remove(struct platform_device *pdev)
-{
- struct twl4030_usb *twl = platform_get_drvdata(pdev);
+ if (cable_present(twl->linkstat))
+ pm_runtime_put_noidle(twl->dev);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put(twl->dev);

- device_remove_file(twl->dev, &dev_attr_vbus);
- device_remove_file(twl->dev, &dev_attr_test);
-
- return twl4030_shutdown(twl);
+ return 0;
}

#ifdef CONFIG_OF
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index bf90753..5c0adb9 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -269,7 +269,6 @@ static int st_dwc3_probe(struct platform_device *pdev)
}

dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev);
- of_node_put(child);

/*
* Configure the USB port as device or host according to the static
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 4589621..f660afb 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -546,11 +546,14 @@ out:
}
EXPORT_SYMBOL_GPL(usb_udc_attach_driver);

-int __usb_gadget_probe_driver(struct usb_gadget_driver *driver)
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
{
struct usb_udc *udc = NULL;
int ret;

+ if (!driver || !driver->bind || !driver->setup)
+ return -EINVAL;
+
mutex_lock(&udc_lock);
list_for_each_entry(udc, &udc_list, list) {
/* For now we take the first one */
@@ -558,6 +561,7 @@ int __usb_gadget_probe_driver(struct usb_gadget_driver *driver)
goto found;
}

+ pr_debug("couldn't find an available UDC\n");
mutex_unlock(&udc_lock);
return -ENODEV;
found:
@@ -565,36 +569,6 @@ found:
mutex_unlock(&udc_lock);
return ret;
}
-
-#define USB_GADGET_BIND_RETRIES 5
-#define USB_GADGET_BIND_TIMEOUT (3 * HZ)
-static void usb_gadget_work(struct work_struct *work)
-{
- struct usb_gadget_driver *driver = container_of(work,
- struct usb_gadget_driver,
- work.work);
- int res;
-
- if (driver->retries++ > USB_GADGET_BIND_RETRIES) {
- pr_err("couldn't find an available UDC\n");
- return;
- }
-
- res = __usb_gadget_probe_driver(driver);
- if (res == -ENODEV)
- schedule_delayed_work(&driver->work, USB_GADGET_BIND_TIMEOUT);
-}
-
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
-{
- if (!driver || !driver->bind || !driver->setup)
- return -EINVAL;
-
- INIT_DELAYED_WORK(&driver->work, usb_gadget_work);
- schedule_delayed_work(&driver->work, 0);
-
- return 0;
-}
EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);

int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
@@ -605,8 +579,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
if (!driver || !driver->unbind)
return -EINVAL;

- cancel_delayed_work(&driver->work);
-
mutex_lock(&udc_lock);
list_for_each_entry(udc, &udc_list, list)
if (udc->driver == driver) {
@@ -763,7 +735,7 @@ static int __init usb_udc_init(void)
udc_class->dev_uevent = usb_udc_uevent;
return 0;
}
-late_initcall_sync(usb_udc_init);
+subsys_initcall(usb_udc_init);

static void __exit usb_udc_exit(void)
{
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index dd120ec..ee9ff70 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1705,23 +1705,6 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
#define use_dma 0
#endif

-static void (*musb_phy_callback)(enum musb_vbus_id_status status);
-
-/*
- * musb_mailbox - optional phy notifier function
- * @status phy state change
- *
- * Optionally gets called from the USB PHY. Note that the USB PHY must be
- * disabled at the point the phy_callback is registered or unregistered.
- */
-void musb_mailbox(enum musb_vbus_id_status status)
-{
- if (musb_phy_callback)
- musb_phy_callback(status);
-
-};
-EXPORT_SYMBOL_GPL(musb_mailbox);
-
/*-------------------------------------------------------------------------*/

static ssize_t
@@ -2134,9 +2117,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->xceiv->io_ops = &musb_ulpi_access;
}

- if (musb->ops->phy_callback)
- musb_phy_callback = musb->ops->phy_callback;
-
pm_runtime_get_sync(musb->controller);

if (use_dma && dev->dma_mask) {
@@ -2315,7 +2295,6 @@ static int musb_remove(struct platform_device *pdev)
*/
musb_exit_debugfs(musb);
musb_shutdown(pdev);
- musb_phy_callback = NULL;

if (musb->dma_controller)
musb_dma_controller_destroy(musb->dma_controller);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index fd215fb..2337d7a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -168,7 +168,6 @@ struct musb_io;
* @adjust_channel_params: pre check for standard dma channel_program func
* @pre_root_reset_end: called before the root usb port reset flag gets cleared
* @post_root_reset_end: called after the root usb port reset flag gets cleared
- * @phy_callback: optional callback function for the phy to call
*/
struct musb_platform_ops {

@@ -215,7 +214,6 @@ struct musb_platform_ops {
dma_addr_t *dma_addr, u32 *len);
void (*pre_root_reset_end)(struct musb *musb);
void (*post_root_reset_end)(struct musb *musb);
- void (*phy_callback)(enum musb_vbus_id_status status);
};

/*
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c84e0322..1bd9232 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -36,7 +36,7 @@
#include <linux/pm_runtime.h>
#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/usb/musb.h>
+#include <linux/usb/musb-omap.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>

@@ -46,7 +46,7 @@
struct omap2430_glue {
struct device *dev;
struct platform_device *musb;
- enum musb_vbus_id_status status;
+ enum omap_musb_vbus_id_status status;
struct work_struct omap_musb_mailbox_work;
struct device *control_otghs;
};
@@ -234,7 +234,7 @@ static inline void omap2430_low_level_init(struct musb *musb)
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
}

-static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
{
struct omap2430_glue *glue = _glue;

@@ -251,6 +251,7 @@ static void omap2430_musb_mailbox(enum musb_vbus_id_status status)

schedule_work(&glue->omap_musb_mailbox_work);
}
+EXPORT_SYMBOL_GPL(omap_musb_mailbox);

static void omap_musb_set_mailbox(struct omap2430_glue *glue)
{
@@ -261,7 +262,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct usb_otg *otg = musb->xceiv->otg;

switch (glue->status) {
- case MUSB_ID_GROUND:
+ case OMAP_MUSB_ID_GROUND:
dev_dbg(dev, "ID GND\n");

otg->default_a = true;
@@ -275,7 +276,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
}
break;

- case MUSB_VBUS_VALID:
+ case OMAP_MUSB_VBUS_VALID:
dev_dbg(dev, "VBUS Connect\n");

otg->default_a = false;
@@ -286,8 +287,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
break;

- case MUSB_ID_FLOAT:
- case MUSB_VBUS_OFF:
+ case OMAP_MUSB_ID_FLOAT:
+ case OMAP_MUSB_VBUS_OFF:
dev_dbg(dev, "VBUS Disconnect\n");

musb->xceiv->last_event = USB_EVENT_NONE;
@@ -429,7 +430,7 @@ static int omap2430_musb_init(struct musb *musb)

setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);

- if (glue->status != MUSB_UNKNOWN)
+ if (glue->status != OMAP_MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);

phy_init(musb->phy);
@@ -454,7 +455,7 @@ static void omap2430_musb_enable(struct musb *musb)

switch (glue->status) {

- case MUSB_ID_GROUND:
+ case OMAP_MUSB_ID_GROUND:
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
if (data->interface_type != MUSB_INTERFACE_UTMI)
break;
@@ -473,7 +474,7 @@ static void omap2430_musb_enable(struct musb *musb)
}
break;

- case MUSB_VBUS_VALID:
+ case OMAP_MUSB_VBUS_VALID:
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
break;

@@ -487,7 +488,7 @@ static void omap2430_musb_disable(struct musb *musb)
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);

- if (glue->status != MUSB_UNKNOWN)
+ if (glue->status != OMAP_MUSB_UNKNOWN)
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
}
@@ -519,8 +520,6 @@ static const struct musb_platform_ops omap2430_ops = {

.enable = omap2430_musb_enable,
.disable = omap2430_musb_disable,
-
- .phy_callback = omap2430_musb_mailbox,
};

static u64 omap2430_dmamask = DMA_BIT_MASK(32);
@@ -552,7 +551,7 @@ static int omap2430_probe(struct platform_device *pdev)

glue->dev = &pdev->dev;
glue->musb = musb;
- glue->status = MUSB_UNKNOWN;
+ glue->status = OMAP_MUSB_UNKNOWN;
glue->control_otghs = ERR_PTR(-ENODEV);

if (np) {
@@ -664,11 +663,8 @@ static int omap2430_remove(struct platform_device *pdev)
{
struct omap2430_glue *glue = platform_get_drvdata(pdev);

- pm_runtime_get_sync(glue->dev);
cancel_work_sync(&glue->omap_musb_mailbox_work);
platform_device_unregister(glue->musb);
- pm_runtime_put_sync(glue->dev);
- pm_runtime_disable(glue->dev);

return 0;
}
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 014dbbd7..1274185 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -25,7 +25,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/usb/musb.h>
+#include <linux/usb/musb-omap.h>
#include <linux/usb/phy_companion.h>
#include <linux/phy/omap_usb.h>
#include <linux/i2c/twl.h>
@@ -102,7 +102,7 @@ struct twl6030_usb {

int irq1;
int irq2;
- enum musb_vbus_id_status linkstat;
+ enum omap_musb_vbus_id_status linkstat;
u8 asleep;
bool vbus_enable;
const char *regulator;
@@ -189,13 +189,13 @@ static ssize_t twl6030_usb_vbus_show(struct device *dev,
spin_lock_irqsave(&twl->lock, flags);

switch (twl->linkstat) {
- case MUSB_VBUS_VALID:
+ case OMAP_MUSB_VBUS_VALID:
ret = snprintf(buf, PAGE_SIZE, "vbus\n");
break;
- case MUSB_ID_GROUND:
+ case OMAP_MUSB_ID_GROUND:
ret = snprintf(buf, PAGE_SIZE, "id\n");
break;
- case MUSB_VBUS_OFF:
+ case OMAP_MUSB_VBUS_OFF:
ret = snprintf(buf, PAGE_SIZE, "none\n");
break;
default:
@@ -210,7 +210,7 @@ static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
{
struct twl6030_usb *twl = _twl;
- enum musb_vbus_id_status status = MUSB_UNKNOWN;
+ enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
u8 vbus_state, hw_state;
int ret;

@@ -225,14 +225,14 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
dev_err(twl->dev, "Failed to enable usb3v3\n");

twl->asleep = 1;
- status = MUSB_VBUS_VALID;
+ status = OMAP_MUSB_VBUS_VALID;
twl->linkstat = status;
- musb_mailbox(status);
+ omap_musb_mailbox(status);
} else {
- if (twl->linkstat != MUSB_UNKNOWN) {
- status = MUSB_VBUS_OFF;
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
+ status = OMAP_MUSB_VBUS_OFF;
twl->linkstat = status;
- musb_mailbox(status);
+ omap_musb_mailbox(status);
if (twl->asleep) {
regulator_disable(twl->usb3v3);
twl->asleep = 0;
@@ -248,7 +248,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
{
struct twl6030_usb *twl = _twl;
- enum musb_vbus_id_status status = MUSB_UNKNOWN;
+ enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
u8 hw_state;
int ret;

@@ -262,9 +262,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
twl->asleep = 1;
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
- status = MUSB_ID_GROUND;
+ status = OMAP_MUSB_ID_GROUND;
twl->linkstat = status;
- musb_mailbox(status);
+ omap_musb_mailbox(status);
} else {
twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -334,7 +334,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
twl->dev = &pdev->dev;
twl->irq1 = platform_get_irq(pdev, 0);
twl->irq2 = platform_get_irq(pdev, 1);
- twl->linkstat = MUSB_UNKNOWN;
+ twl->linkstat = OMAP_MUSB_UNKNOWN;

twl->comparator.set_vbus = twl6030_set_vbus;
twl->comparator.start_srp = twl6030_start_srp;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e5af629..3d583a1 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1011,8 +1011,6 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget)
* @resume: Invoked on USB resume. May be called in_interrupt.
* @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
* and should be called in_interrupt.
- * @work: Gadget work used to bind to the USB controller.
- * @retries: Gadget retries to bind to the USB controller.
* @driver: Driver model state for this driver.
*
* Devices are disabled till a gadget driver successfully bind()s, which
@@ -1071,8 +1069,6 @@ struct usb_gadget_driver {
void (*suspend)(struct usb_gadget *);
void (*resume)(struct usb_gadget *);
void (*reset)(struct usb_gadget *);
- struct delayed_work work;
- int retries;

/* FIXME support safe rmmod */
struct device_driver driver;
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 96ddfb7..fa6dc13 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -133,21 +133,6 @@ struct musb_hdrc_platform_data {
const void *platform_ops;
};

-enum musb_vbus_id_status {
- MUSB_UNKNOWN = 0,
- MUSB_ID_GROUND,
- MUSB_ID_FLOAT,
- MUSB_VBUS_VALID,
- MUSB_VBUS_OFF,
-};
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-void musb_mailbox(enum musb_vbus_id_status status);
-#else
-static inline void musb_mailbox(enum musb_vbus_id_status status)
-{
-}
-#endif

/* TUSB 6010 support */




diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 9708cf5..ce18f57 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -34,7 +34,7 @@
#include <linux/usb/otg.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
-#include <linux/usb/musb.h>
+#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
@@ -148,10 +148,10 @@
* If VBUS is valid or ID is ground, then we know a
* cable is present and we need to be runtime-enabled
*/
-static inline bool cable_present(enum musb_vbus_id_status stat)
+static inline bool cable_present(enum omap_musb_vbus_id_status stat)
{
- return stat == MUSB_VBUS_VALID ||
- stat == MUSB_ID_GROUND;
+ return stat == OMAP_MUSB_VBUS_VALID ||
+ stat == OMAP_MUSB_ID_GROUND;
}

struct twl4030_usb {
@@ -170,7 +170,7 @@ struct twl4030_usb {
enum twl4030_usb_mode usb_mode;

int irq;
- enum musb_vbus_id_status linkstat;
+ enum omap_musb_vbus_id_status linkstat;
bool vbus_supplied;

struct delayed_work id_workaround_work;
@@ -276,11 +276,11 @@ static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
}

-static enum musb_vbus_id_status
+static enum omap_musb_vbus_id_status
twl4030_usb_linkstat(struct twl4030_usb *twl)
{
int status;
- enum musb_vbus_id_status linkstat = MUSB_UNKNOWN;
+ enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;

twl->vbus_supplied = false;

@@ -306,14 +306,14 @@ static enum musb_vbus_id_status
}

if (status & BIT(2))
- linkstat = MUSB_ID_GROUND;
+ linkstat = OMAP_MUSB_ID_GROUND;
else if (status & BIT(7))
- linkstat = MUSB_VBUS_VALID;
+ linkstat = OMAP_MUSB_VBUS_VALID;
else
- linkstat = MUSB_VBUS_OFF;
+ linkstat = OMAP_MUSB_VBUS_OFF;
} else {
- if (twl->linkstat != MUSB_UNKNOWN)
- linkstat = MUSB_VBUS_OFF;
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN)
+ linkstat = OMAP_MUSB_VBUS_OFF;
}

dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
@@ -532,47 +532,10 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
}
static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);

-static ssize_t twl4030_test_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct twl4030_usb *twl = dev_get_drvdata(dev);
- int ret = -EINVAL;
-
- mutex_lock(&twl->lock);
- ret = sprintf(buf, "%s\n", "hello, world");
- mutex_unlock(&twl->lock);
-
- return ret;
-}
-
-static int twl4030_shutdown(struct twl4030_usb *twl);
-
-static ssize_t twl4030_test_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- unsigned long tmp;
-
- struct twl4030_usb *twl = dev_get_drvdata(dev);
-
- mutex_lock(&twl->lock);
- sscanf(buf, "%lX", &tmp);
- printk("TWL HACK: tmp = 0x%lX\n", tmp);
- mutex_unlock(&twl->lock);
-
- if (tmp == 0xdead) {
- printk("TWL HACK: killing hardware\n");
- printk("TWL HACK: killing hardware = %d\n", twl4030_shutdown(twl));
- }
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(test, 0664, twl4030_test_show, twl4030_test_store);
-
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
struct twl4030_usb *twl = _twl;
- enum musb_vbus_id_status status;
+ enum omap_musb_vbus_id_status status;
bool status_changed = false;

status = twl4030_usb_linkstat(twl);
@@ -604,11 +567,11 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
}
- musb_mailbox(status);
+ omap_musb_mailbox(status);
}

/* don't schedule during sleep - irq works right then */
- if (status == MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
+ if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
cancel_delayed_work(&twl->id_workaround_work);
schedule_delayed_work(&twl->id_workaround_work, HZ);
}
@@ -707,7 +670,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
twl->vbus_supplied = false;
- twl->linkstat = MUSB_UNKNOWN;
+ twl->linkstat = OMAP_MUSB_UNKNOWN;

twl->phy.dev = twl->dev;
twl->phy.label = "twl4030";
@@ -747,15 +710,11 @@ static int twl4030_usb_probe(struct platform_device *pdev)
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");

- if (device_create_file(&pdev->dev, &dev_attr_test))
- dev_warn(&pdev->dev, "could not create sysfs file #2\n");
-
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);

pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);

/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
@@ -775,7 +734,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
}

if (pdata)
- err = phy_create_lookup(phy, "usb", "musb-hdrc.0");
+ err = phy_create_lookup(phy, "usb", "musb-hdrc.0.auto");
if (err)
return err;

@@ -786,24 +745,18 @@ static int twl4030_usb_probe(struct platform_device *pdev)
return 0;
}

-static int twl4030_shutdown(struct twl4030_usb *twl)
+static int twl4030_usb_remove(struct platform_device *pdev)
{
+ struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;

- usb_remove_phy(&twl->phy);
pm_runtime_get_sync(twl->dev);
cancel_delayed_work(&twl->id_workaround_work);
+ device_remove_file(twl->dev, &dev_attr_vbus);

/* set transceiver mode to power on defaults */
twl4030_usb_set_mode(twl, -1);

- /* idle ulpi before powering off */
- if (cable_present(twl->linkstat))
- pm_runtime_put_noidle(twl->dev);
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_sync_suspend(twl->dev);
- pm_runtime_disable(twl->dev);
-
/* autogate 60MHz ULPI clock,
* clear dpll clock request for i2c access,
* disable 32KHz
@@ -818,18 +771,12 @@ static int twl4030_shutdown(struct twl4030_usb *twl)
/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);

- return 0;
-}
-
-
-static int twl4030_usb_remove(struct platform_device *pdev)
-{
- struct twl4030_usb *twl = platform_get_drvdata(pdev);
+ if (cable_present(twl->linkstat))
+ pm_runtime_put_noidle(twl->dev);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put(twl->dev);

- device_remove_file(twl->dev, &dev_attr_vbus);
- device_remove_file(twl->dev, &dev_attr_test);
-
- return twl4030_shutdown(twl);
+ return 0;
}

#ifdef CONFIG_OF
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index bf90753..5c0adb9 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -269,7 +269,6 @@ static int st_dwc3_probe(struct platform_device *pdev)
}

dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev);
- of_node_put(child);

/*
* Configure the USB port as device or host according to the static
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 4589621..f660afb 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -546,11 +546,14 @@ out:
}
EXPORT_SYMBOL_GPL(usb_udc_attach_driver);

-int __usb_gadget_probe_driver(struct usb_gadget_driver *driver)
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
{
struct usb_udc *udc = NULL;
int ret;

+ if (!driver || !driver->bind || !driver->setup)
+ return -EINVAL;
+
mutex_lock(&udc_lock);
list_for_each_entry(udc, &udc_list, list) {
/* For now we take the first one */
@@ -558,6 +561,7 @@ int __usb_gadget_probe_driver(struct usb_gadget_driver *driver)
goto found;
}

+ pr_debug("couldn't find an available UDC\n");
mutex_unlock(&udc_lock);
return -ENODEV;
found:
@@ -565,36 +569,6 @@ found:
mutex_unlock(&udc_lock);
return ret;
}
-
-#define USB_GADGET_BIND_RETRIES 5
-#define USB_GADGET_BIND_TIMEOUT (3 * HZ)
-static void usb_gadget_work(struct work_struct *work)
-{
- struct usb_gadget_driver *driver = container_of(work,
- struct usb_gadget_driver,
- work.work);
- int res;
-
- if (driver->retries++ > USB_GADGET_BIND_RETRIES) {
- pr_err("couldn't find an available UDC\n");
- return;
- }
-
- res = __usb_gadget_probe_driver(driver);
- if (res == -ENODEV)
- schedule_delayed_work(&driver->work, USB_GADGET_BIND_TIMEOUT);
-}
-
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
-{
- if (!driver || !driver->bind || !driver->setup)
- return -EINVAL;
-
- INIT_DELAYED_WORK(&driver->work, usb_gadget_work);
- schedule_delayed_work(&driver->work, 0);
-
- return 0;
-}
EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);

int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
@@ -605,8 +579,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
if (!driver || !driver->unbind)
return -EINVAL;

- cancel_delayed_work(&driver->work);
-
mutex_lock(&udc_lock);
list_for_each_entry(udc, &udc_list, list)
if (udc->driver == driver) {
@@ -763,7 +735,7 @@ static int __init usb_udc_init(void)
udc_class->dev_uevent = usb_udc_uevent;
return 0;
}
-late_initcall_sync(usb_udc_init);
+subsys_initcall(usb_udc_init);

static void __exit usb_udc_exit(void)
{
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index dd120ec..ee9ff70 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1705,23 +1705,6 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
#define use_dma 0
#endif

-static void (*musb_phy_callback)(enum musb_vbus_id_status status);
-
-/*
- * musb_mailbox - optional phy notifier function
- * @status phy state change
- *
- * Optionally gets called from the USB PHY. Note that the USB PHY must be
- * disabled at the point the phy_callback is registered or unregistered.
- */
-void musb_mailbox(enum musb_vbus_id_status status)
-{
- if (musb_phy_callback)
- musb_phy_callback(status);
-
-};
-EXPORT_SYMBOL_GPL(musb_mailbox);
-
/*-------------------------------------------------------------------------*/

static ssize_t
@@ -2134,9 +2117,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->xceiv->io_ops = &musb_ulpi_access;
}

- if (musb->ops->phy_callback)
- musb_phy_callback = musb->ops->phy_callback;
-
pm_runtime_get_sync(musb->controller);

if (use_dma && dev->dma_mask) {
@@ -2315,7 +2295,6 @@ static int musb_remove(struct platform_device *pdev)
*/
musb_exit_debugfs(musb);
musb_shutdown(pdev);
- musb_phy_callback = NULL;

if (musb->dma_controller)
musb_dma_controller_destroy(musb->dma_controller);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index fd215fb..2337d7a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -168,7 +168,6 @@ struct musb_io;
* @adjust_channel_params: pre check for standard dma channel_program func
* @pre_root_reset_end: called before the root usb port reset flag gets cleared
* @post_root_reset_end: called after the root usb port reset flag gets cleared
- * @phy_callback: optional callback function for the phy to call
*/
struct musb_platform_ops {

@@ -215,7 +214,6 @@ struct musb_platform_ops {
dma_addr_t *dma_addr, u32 *len);
void (*pre_root_reset_end)(struct musb *musb);
void (*post_root_reset_end)(struct musb *musb);
- void (*phy_callback)(enum musb_vbus_id_status status);
};

/*
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c84e0322..1bd9232 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -36,7 +36,7 @@
#include <linux/pm_runtime.h>
#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/usb/musb.h>
+#include <linux/usb/musb-omap.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>

@@ -46,7 +46,7 @@
struct omap2430_glue {
struct device *dev;
struct platform_device *musb;
- enum musb_vbus_id_status status;
+ enum omap_musb_vbus_id_status status;
struct work_struct omap_musb_mailbox_work;
struct device *control_otghs;
};
@@ -234,7 +234,7 @@ static inline void omap2430_low_level_init(struct musb *musb)
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
}

-static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
{
struct omap2430_glue *glue = _glue;

@@ -251,6 +251,7 @@ static void omap2430_musb_mailbox(enum musb_vbus_id_status status)

schedule_work(&glue->omap_musb_mailbox_work);
}
+EXPORT_SYMBOL_GPL(omap_musb_mailbox);

static void omap_musb_set_mailbox(struct omap2430_glue *glue)
{
@@ -261,7 +262,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct usb_otg *otg = musb->xceiv->otg;

switch (glue->status) {
- case MUSB_ID_GROUND:
+ case OMAP_MUSB_ID_GROUND:
dev_dbg(dev, "ID GND\n");

otg->default_a = true;
@@ -275,7 +276,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
}
break;

- case MUSB_VBUS_VALID:
+ case OMAP_MUSB_VBUS_VALID:
dev_dbg(dev, "VBUS Connect\n");

otg->default_a = false;
@@ -286,8 +287,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
break;

- case MUSB_ID_FLOAT:
- case MUSB_VBUS_OFF:
+ case OMAP_MUSB_ID_FLOAT:
+ case OMAP_MUSB_VBUS_OFF:
dev_dbg(dev, "VBUS Disconnect\n");

musb->xceiv->last_event = USB_EVENT_NONE;
@@ -429,7 +430,7 @@ static int omap2430_musb_init(struct musb *musb)

setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);

- if (glue->status != MUSB_UNKNOWN)
+ if (glue->status != OMAP_MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);

phy_init(musb->phy);
@@ -454,7 +455,7 @@ static void omap2430_musb_enable(struct musb *musb)

switch (glue->status) {

- case MUSB_ID_GROUND:
+ case OMAP_MUSB_ID_GROUND:
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
if (data->interface_type != MUSB_INTERFACE_UTMI)
break;
@@ -473,7 +474,7 @@ static void omap2430_musb_enable(struct musb *musb)
}
break;

- case MUSB_VBUS_VALID:
+ case OMAP_MUSB_VBUS_VALID:
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
break;

@@ -487,7 +488,7 @@ static void omap2430_musb_disable(struct musb *musb)
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);

- if (glue->status != MUSB_UNKNOWN)
+ if (glue->status != OMAP_MUSB_UNKNOWN)
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
}
@@ -519,8 +520,6 @@ static const struct musb_platform_ops omap2430_ops = {

.enable = omap2430_musb_enable,
.disable = omap2430_musb_disable,
-
- .phy_callback = omap2430_musb_mailbox,
};

static u64 omap2430_dmamask = DMA_BIT_MASK(32);
@@ -552,7 +551,7 @@ static int omap2430_probe(struct platform_device *pdev)

glue->dev = &pdev->dev;
glue->musb = musb;
- glue->status = MUSB_UNKNOWN;
+ glue->status = OMAP_MUSB_UNKNOWN;
glue->control_otghs = ERR_PTR(-ENODEV);

if (np) {
@@ -664,11 +663,8 @@ static int omap2430_remove(struct platform_device *pdev)
{
struct omap2430_glue *glue = platform_get_drvdata(pdev);

- pm_runtime_get_sync(glue->dev);
cancel_work_sync(&glue->omap_musb_mailbox_work);
platform_device_unregister(glue->musb);
- pm_runtime_put_sync(glue->dev);
- pm_runtime_disable(glue->dev);

return 0;
}
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 014dbbd7..1274185 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -25,7 +25,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/usb/musb.h>
+#include <linux/usb/musb-omap.h>
#include <linux/usb/phy_companion.h>
#include <linux/phy/omap_usb.h>
#include <linux/i2c/twl.h>
@@ -102,7 +102,7 @@ struct twl6030_usb {

int irq1;
int irq2;
- enum musb_vbus_id_status linkstat;
+ enum omap_musb_vbus_id_status linkstat;
u8 asleep;
bool vbus_enable;
const char *regulator;
@@ -189,13 +189,13 @@ static ssize_t twl6030_usb_vbus_show(struct device *dev,
spin_lock_irqsave(&twl->lock, flags);

switch (twl->linkstat) {
- case MUSB_VBUS_VALID:
+ case OMAP_MUSB_VBUS_VALID:
ret = snprintf(buf, PAGE_SIZE, "vbus\n");
break;
- case MUSB_ID_GROUND:
+ case OMAP_MUSB_ID_GROUND:
ret = snprintf(buf, PAGE_SIZE, "id\n");
break;
- case MUSB_VBUS_OFF:
+ case OMAP_MUSB_VBUS_OFF:
ret = snprintf(buf, PAGE_SIZE, "none\n");
break;
default:
@@ -210,7 +210,7 @@ static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
{
struct twl6030_usb *twl = _twl;
- enum musb_vbus_id_status status = MUSB_UNKNOWN;
+ enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
u8 vbus_state, hw_state;
int ret;

@@ -225,14 +225,14 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
dev_err(twl->dev, "Failed to enable usb3v3\n");

twl->asleep = 1;
- status = MUSB_VBUS_VALID;
+ status = OMAP_MUSB_VBUS_VALID;
twl->linkstat = status;
- musb_mailbox(status);
+ omap_musb_mailbox(status);
} else {
- if (twl->linkstat != MUSB_UNKNOWN) {
- status = MUSB_VBUS_OFF;
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
+ status = OMAP_MUSB_VBUS_OFF;
twl->linkstat = status;
- musb_mailbox(status);
+ omap_musb_mailbox(status);
if (twl->asleep) {
regulator_disable(twl->usb3v3);
twl->asleep = 0;
@@ -248,7 +248,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
{
struct twl6030_usb *twl = _twl;
- enum musb_vbus_id_status status = MUSB_UNKNOWN;
+ enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
u8 hw_state;
int ret;

@@ -262,9 +262,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
twl->asleep = 1;
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
- status = MUSB_ID_GROUND;
+ status = OMAP_MUSB_ID_GROUND;
twl->linkstat = status;
- musb_mailbox(status);
+ omap_musb_mailbox(status);
} else {
twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -334,7 +334,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
twl->dev = &pdev->dev;
twl->irq1 = platform_get_irq(pdev, 0);
twl->irq2 = platform_get_irq(pdev, 1);
- twl->linkstat = MUSB_UNKNOWN;
+ twl->linkstat = OMAP_MUSB_UNKNOWN;

twl->comparator.set_vbus = twl6030_set_vbus;
twl->comparator.start_srp = twl6030_start_srp;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e5af629..3d583a1 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1011,8 +1011,6 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget)
* @resume: Invoked on USB resume. May be called in_interrupt.
* @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
* and should be called in_interrupt.
- * @work: Gadget work used to bind to the USB controller.
- * @retries: Gadget retries to bind to the USB controller.
* @driver: Driver model state for this driver.
*
* Devices are disabled till a gadget driver successfully bind()s, which
@@ -1071,8 +1069,6 @@ struct usb_gadget_driver {
void (*suspend)(struct usb_gadget *);
void (*resume)(struct usb_gadget *);
void (*reset)(struct usb_gadget *);
- struct delayed_work work;
- int retries;

/* FIXME support safe rmmod */
struct device_driver driver;
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 96ddfb7..fa6dc13 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -133,21 +133,6 @@ struct musb_hdrc_platform_data {
const void *platform_ops;
};

-enum musb_vbus_id_status {
- MUSB_UNKNOWN = 0,
- MUSB_ID_GROUND,
- MUSB_ID_FLOAT,
- MUSB_VBUS_VALID,
- MUSB_VBUS_OFF,
-};
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-void musb_mailbox(enum musb_vbus_id_status status);
-#else
-static inline void musb_mailbox(enum musb_vbus_id_status status)
-{
-}
-#endif

/* TUSB 6010 support */

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

\
 
 \ /
  Last update: 2016-03-25 23:01    [W:0.131 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site