[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] regulator: twl: Enable regulators over the powerbus as well
On Fri, Mar 25, 2016 at 07:22:45PM +0200, Ivaylo Dimitrov wrote:

> On Nokia N900 regulators are left in the mode last set by the bootloader or
> by the stock kernel, depends on whether it is power-on or reboot from stock
> kernel to mainline. That leads to problem with devices connected to vmmc2
> regulator - when the device is rebooted from stock kernel vmmc2 is left in
> "sleep" mode (REGULATOR_STATUS_STANDBY in terms of regulator framework) and
> as noone in mainline kernel switches vmmc2 regulator to normal
> (REGULATOR_STATUS_NORMAL) mode, devices supplied by it does not get enough
> power to operate normally.

Then there is a constraint that the regulators must be in normal mode
and this needs to be expressed in the machine constraints.
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2016-03-25 19:41    [W:0.489 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site