lkml.org 
[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 01/16] dt: davinci: use proper address after @
From
Date
Hello.

On 03/25/2016 06:13 PM, Rob Herring wrote:

>>> TI has been using the physical address in DT after the @ in device nodes.
>>> The device tree convention is to use the same address that is used for
>>> the reg property. This updates all davinci DT files to use the proper
>>> convention.
>>>
>>> Signed-off-by: David Lechner <david@lechnology.com>
>>
>> [...]
>>
>>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>>> index 226cda7..4294849 100644
>>> --- a/arch/arm/boot/dts/da850.dtsi
>>> +++ b/arch/arm/boot/dts/da850.dtsi
>>> @@ -15,7 +15,7 @@
>>> #address-cells = <1>;
>>> #size-cells = <1>;
>>> ranges;
>>> - intc: interrupt-controller {
>>> + intc: interrupt-controller@fffee000 {
>>> compatible = "ti,cp-intc";
>>> interrupt-controller;
>>> #interrupt-cells = <1>;
>>> @@ -23,7 +23,7 @@
>>> reg = <0xfffee000 0x2000>;
>>> };
>>> };
>>> - soc {
>>> + soc@1c00000 {
>>
>>
>> This node doesn't have the "reg" prop.

> But probably has a ranges property which is correct.

Yes, it does. Didn't know that "ranges" can be used that way, thanks...

> Rob

MBR, Sergei

\
 
 \ /
  Last update: 2016-03-25 18:01    [W:0.072 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site