lkml.org 
[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 01/16] dt: davinci: use proper address after @
On Fri, Mar 25, 2016 at 8:29 AM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Hello.
>
> On 03/25/2016 02:51 AM, David Lechner wrote:
>
>> TI has been using the physical address in DT after the @ in device nodes.
>> The device tree convention is to use the same address that is used for
>> the reg property. This updates all davinci DT files to use the proper
>> convention.
>>
>> Signed-off-by: David Lechner <david@lechnology.com>
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 226cda7..4294849 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -15,7 +15,7 @@
>> #address-cells = <1>;
>> #size-cells = <1>;
>> ranges;
>> - intc: interrupt-controller {
>> + intc: interrupt-controller@fffee000 {
>> compatible = "ti,cp-intc";
>> interrupt-controller;
>> #interrupt-cells = <1>;
>> @@ -23,7 +23,7 @@
>> reg = <0xfffee000 0x2000>;
>> };
>> };
>> - soc {
>> + soc@1c00000 {
>
>
> This node doesn't have the "reg" prop.

But probably has a ranges property which is correct.

Rob

\
 
 \ /
  Last update: 2016-03-25 16:41    [W:0.056 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site