lkml.org 
[lkml]   [2016]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Intel-wired-lan] [PATCH v2] e1000e: free IRQ regardless of __E1000_DOWN
From
Date
On 12/2/2016 7:02 PM, Baicar, Tyler wrote:
> Hello Sasha,
>
> Were you able to reproduce this issue?
>
> Do you have a patch fixing the close function inconsistencies that you
> mentioned which I could try out?
>
> Thanks,
> Tyler
>
> On 11/21/2016 1:40 PM, Baicar, Tyler wrote:
>> On 11/17/2016 6:31 AM, Neftin, Sasha wrote:
>>> On 11/13/2016 10:34 AM, Neftin, Sasha wrote:
>>>> On 11/11/2016 12:35 AM, Baicar, Tyler wrote:
>>>>> Hello Sasha,
>>>>>
>>>>> On 11/9/2016 11:19 PM, Neftin, Sasha wrote:
>>>>>> On 11/9/2016 11:41 PM, Tyler Baicar wrote:
>>>>>>> Move IRQ free code so that it will happen regardless of the
>>>>>>> __E1000_DOWN bit. Currently the e1000e driver only releases its IRQ
>>>>>>> if the __E1000_DOWN bit is cleared. This is not sufficient because
>>>>>>> it is possible for __E1000_DOWN to be set without releasing the IRQ.
>>>>>>> In such a situation, we will hit a kernel bug later in e1000_remove
>>>>>>> because the IRQ still has action since it was never freed. A
>>>>>>> secondary bus reset can cause this case to happen.
>>>>>>>
>>>>>>> Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
>>>>>>> ---
>>>>>>> drivers/net/ethernet/intel/e1000e/netdev.c | 3 ++-
>>>>>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>>>> b/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>>>> index 7017281..36cfcb0 100644
>>>>>>> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>>>> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>>>> @@ -4679,12 +4679,13 @@ int e1000e_close(struct net_device *netdev)
>>>>>>> if (!test_bit(__E1000_DOWN, &adapter->state)) {
>>>>>>> e1000e_down(adapter, true);
>>>>>>> - e1000_free_irq(adapter);
>>>>>>> /* Link status message must follow this format */
>>>>>>> pr_info("%s NIC Link is Down\n", adapter->netdev->name);
>>>>>>> }
>>>>>>> + e1000_free_irq(adapter);
>>>>>>> +
>>>>>>> napi_disable(&adapter->napi);
>>>>>>> e1000e_free_tx_resources(adapter->tx_ring);
>>>>>>>
>>>>>> I would like not recommend insert this change. This change related
>>>>>> driver state machine, we afraid from lot of synchronization
>>>>>> problem and
>>>>>> issues.
>>>>>> We need keep e1000_free_irq in loop and check for 'test_bit' ready.
>>>>> What do you mean here? There is no loop. If __E1000_DOWN is set
>>>>> then we
>>>>> will never free the IRQ.
>>>>>
>>>>>> Another point, does before execute secondary bus reset your SW
>>>>>> back up
>>>>>> pcie configuration space as properly?
>>>>> After a secondary bus reset, the link needs to recover and go back
>>>>> to a
>>>>> working state after 1 second.
>>>>>
>>>>> From the callstack, the issue is happening while removing the
>>>>> endpoint
>>>>> from the system, before applying the secondary bus reset.
>>>>>
>>>>> The order of events is
>>>>> 1. remove the drivers
>>>>> 2. cause a secondary bus reset
>>>>> 3. wait 1 second
>>>> Actually, this is too much, usually link up in less than 100ms.You can
>>>> check Data Link Layer indication.
>>>>> 4. recover the link
>>>>>
>>>>> callstack:
>>>>> free_msi_irqs+0x6c/0x1a8
>>>>> pci_disable_msi+0xb0/0x148
>>>>> e1000e_reset_interrupt_capability+0x60/0x78
>>>>> e1000_remove+0xc8/0x180
>>>>> pci_device_remove+0x48/0x118
>>>>> __device_release_driver+0x80/0x108
>>>>> device_release_driver+0x2c/0x40
>>>>> pci_stop_bus_device+0xa0/0xb0
>>>>> pci_stop_bus_device+0x3c/0xb0
>>>>> pci_stop_root_bus+0x54/0x80
>>>>> acpi_pci_root_remove+0x28/0x64
>>>>> acpi_bus_trim+0x6c/0xa4
>>>>> acpi_device_hotplug+0x19c/0x3f4
>>>>> acpi_hotplug_work_fn+0x28/0x3c
>>>>> process_one_work+0x150/0x460
>>>>> worker_thread+0x50/0x4b8
>>>>> kthread+0xd4/0xe8
>>>>> ret_from_fork+0x10/0x50
>>>>>
>>>>> Thanks,
>>>>> Tyler
>>>>>
>>>> Hello Tyler,
>>>> Okay, we need consult more about this suggestion.
>>>> May I ask what is setup you run? Is there NIC or on board LAN? I would
>>>> like try reproduce this issue in our lab's too.
>>>> Also, is same issue observed with same scenario and others NIC's too?
>>>> Sasha
>>>> _______________________________________________
>>>> Intel-wired-lan mailing list
>>>> Intel-wired-lan@lists.osuosl.org
>>>> http://lists.osuosl.org/mailman/listinfo/intel-wired-lan
>>>>
>>> Hello Tyler,
>>> I see some in consistent implementation of __*_close methods in our
>>> drivers. Do you have any igb NIC to check if same problem persist there?
>>> Thanks,
>>> Sasha
>> Hello Sasha,
>>
>> I couldn't find an igb NIC to test with, but I did find another e1000e
>> card that does not cause the same issue. That card is:
>>
>> 0004:01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
>> Network Connection
>> Subsystem: Intel Corporation Gigabit CT Desktop Adapter
>> Physical Slot: 5-1
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 299
>> Region 0: Memory at c01001c0000 (32-bit, non-prefetchable)
>> [size=128K]
>> Region 1: Memory at c0100100000 (32-bit, non-prefetchable)
>> [size=512K]
>> Region 2: I/O ports at 1000 [size=32]
>> Region 3: Memory at c01001e0000 (32-bit, non-prefetchable)
>> [size=16K]
>> Expansion ROM at c0100180000 [disabled] [size=256K]
>> Capabilities: [c8] Power Management version 2
>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>> Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>> Address: 00000000397f0040 Data: 0000
>> Capabilities: [e0] Express (v1) Endpoint, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <512ns, L1 <64us
>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
>> Unsupported+
>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 256 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>> AuxPwr+ TransPend-
>> LnkCap: Port #8, Speed 2.5GT/s, Width x1, ASPM L0s L1,
>> Exit Latency L0s <128ns, L1 <64us
>> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>> LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
>> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> Capabilities: [a0] MSI-X: Enable- Count=5 Masked-
>> Vector table: BAR=3 offset=00000000
>> PBA: BAR=3 offset=00002000
>> Capabilities: [100 v1] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
>> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> NonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap- CGenEn-
>> ChkCap- ChkEn-
>> Capabilities: [140 v1] Device Serial Number
>> 68-05-ca-ff-ff-29-47-34
>> Kernel driver in use: e1000e
>>
>> Here are the kernel logs from first running the test on this card and
>> then running the test on the Intel 82571EB card that I originally
>> found the issue with (you can see the issue doesn't happen on this
>> card but does on the other):
>>
>> [ 44.146749] ACPI: \_SB_.PCI0: Device has suffered a power fault
>> [ 44.155238] pcieport 0000:00:00.0: PCIe Bus Error:
>> severity=Uncorrected (Non-Fatal), type=Transaction Layer,
>> id=0000(Requester ID)
>> [ 44.166111] pcieport 0000:00:00.0: device [17cb:0400] error
>> status/mask=00004000/00400000
>> [ 44.174420] pcieport 0000:00:00.0: [14] Completion Timeout (First)
>> [ 44.401943] e1000e 0000:01:00.0 eth0: Timesync Tx Control register
>> not set as expected
>> [ 82.445586] pcieport 0002:00:00.0: PCIe Bus Error:
>> severity=Corrected, type=Physical Layer, id=0000(Receiver ID)
>> [ 82.454851] pcieport 0002:00:00.0: device [17cb:0400] error
>> status/mask=00000001/00006000
>> [ 82.463209] pcieport 0002:00:00.0: [ 0] Receiver Error
>> [ 82.469355] pcieport 0002:00:00.0: PCIe Bus Error:
>> severity=Uncorrected (Non-Fatal), type=Transaction Layer,
>> id=0000(Requester ID)
>> [ 82.481026] pcieport 0002:00:00.0: device [17cb:0400] error
>> status/mask=00004000/00400000
>> [ 82.489343] pcieport 0002:00:00.0: [14] Completion Timeout (First)
>> [ 82.504573] ACPI: \_SB_.PCI2: Device has suffered a power fault
>> [ 84.528036] kernel BUG at drivers/pci/msi.c:369!
>>
>> I'm not sure why it reproduces on the 82571EB card and not the 82574L
>> card. The only obvious difference is there is no Reciever Error on the
>> 82574L card.
>>
>> If you have a patch fixing the inconsistencies you mentioned with the
>> __*_close methods I would certainly be willing to test it out!
>>
>> Thanks,
>> Tyler
>>
>
Hello Tyler,
We do not tried reproduce issues yet. As I know hit on BUG_ON happen on
very old NIC. Our more new NIC do not experienced such problem. I would
like recommend do not change kernel code in this moment. This is very
sensitive for a driver state machine and we afraid from opening lot of
issues. I will investigate more depth this problem later(hope have a
time for it) and let you know if we have suggest fixes for this problem.
Thanks,
Sasha

\
 
 \ /
  Last update: 2016-12-04 08:37    [W:0.076 / U:1.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site