lkml.org 
[lkml]   [2016]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2
Date
Use axp209.dtsi in sun7i-a20-olinuxino-lime2.dts and correct
some regulators.

DCDC2 is used for vdd-cpu so it should never be bellow 1V and above 1.4V
DCDC3 is used for VDD_INT so same as above.
LD01 is used for the RTC, and should have a typical value of 1.3V
LD02 is used for AVCC and should have a typical value of 3.0V
LD03/4 are used for Port-E/Port-G Power pin, and the schematics recommands
to set them to 2.8V as they can be used for CSI0/1.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 90 ++++++++++++-------------
1 file changed, 42 insertions(+), 48 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index d5c796c8d16f..5311dbce6fd9 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,57 +112,9 @@
status = "okay";

axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- acin-supply = <&reg_axp_ipsout>;
- vin2-supply = <&reg_axp_ipsout>;
- vin3-supply = <&reg_axp_ipsout>;
- ldo24in-supply = <&reg_axp_ipsout>;
- ldo3in-supply = <&reg_axp_ipsout>;
-
- regulators {
- vdd_rtc: ldo1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- };
-
- avcc: ldo2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vcc_csi0: ldo3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- vcc_csi1: ldo4 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_cpu: dcdc2 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <2275000>;
- regulator-always-on;
- };
-
- vdd_int: dcdc3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
- };
};
};

@@ -243,6 +195,48 @@
status = "okay";
};

+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vddio-csi0";
+};
+
+&reg_ldo4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vddio-csi1";
+};
+
&reg_usb0_vbus {
pinctrl-0 = <&usb0_vbus_pin_lime2>;
gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
--
2.11.0
\
 
 \ /
  Last update: 2016-12-27 11:23    [W:0.047 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site