lkml.org 
[lkml]   [2016]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 RESEND] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_probe()
Date
The commit a55944ca82d2 
("backlight: update bd state & fb_blank properties when necessary")
has posed some extra restrictions on blanking and unblanking frame buffer
device.

Unfortunately, pwm_bl driver's probe did not initialize members of
struct backlight_device necessary for further blank/unblank operation.

This code in case of initial unblank of backlight device (default
behaviour) sets use_count to 1 and marks this particular backlight device
as used by all available fb devices (since it is not known during probe
how much and which fb devices will be assigned).

Without this code, the backlight works properly until one tries to blank it
manually from sysfs with "echo 1 > /sys/class/graphics/fb0/blank".
Since fb_bl_on[0] and use_count were both set to 0, the logic at
fb_notifier_callback (@backlight.c) thought that we didn't turn on
(unblanked) the backlight device and refuses to disable (blank) it.
As a result we see garbage from fb displayed.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
---
The patch has been tested on i.MX6q with vanilla 4.9 kernel.
It applies on 4.10-rc1.
---
drivers/video/backlight/pwm_bl.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 1261400..6859ba0 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
struct pwm_bl_data *pb;
int initial_blank = FB_BLANK_UNBLANK;
struct pwm_args pargs;
- int ret;
+ int ret, i;

if (!data) {
ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
@@ -348,6 +348,14 @@ static int pwm_backlight_probe(struct platform_device *pdev)

bl->props.brightness = data->dft_brightness;
bl->props.power = initial_blank;
+
+ if (initial_blank == FB_BLANK_UNBLANK) {
+ for (i = 0; i < FB_MAX; i++)
+ bl->fb_bl_on[i] = true;
+
+ bl->use_count = 1;
+ }
+
backlight_update_status(bl);

platform_set_drvdata(pdev, bl);
--
2.1.4
\
 
 \ /
  Last update: 2016-12-27 00:01    [W:0.222 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site