lkml.org 
[lkml]   [2016]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] binding: irqchip: mtk-cirq: Add binding document
On Tue, Nov 01, 2016 at 07:52:00PM +0800, Youlin Pei wrote:
> This commit adds the device tree binding document for
> the mediatek cirq.
>
> Signed-off-by: Youlin Pei <youlin.pei@mediatek.com>
> ---
> .../interrupt-controller/mediatek,cirq.txt | 30 ++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
> new file mode 100644
> index 0000000..84e8123
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
> @@ -0,0 +1,30 @@
> +* Mediatek 27xx cirq
> +
> +In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
> +works outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.

s/works/work/

> +The external interrupts (outside MCUSYS) will feed through CIRQ and connect
> +to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
> +interrupts and generated a pulse signal to parent interrupt controller when

s/generated/generate/

> +flush command is executed. With CIRQ, MCUSYS can be completely turned off
> +to improve the system power consumption without losing interrupts.
> +
> +Required properties:
> +- compatible: should be: "mediatek,mtk-cirq".

This should be SoC specific. This is fine as a fallback if the same
block is in many SoCs, but mediatek and mtk is a bit redundant.

> +- interrupt-controller : Identifies the node as an interrupt controller.
> +- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
> +- interrupt-parent: phandle of irq parent for cirq. The parent must
> + use the same interrupt-cells format as GIC.
> +- reg: Physical base address of the cirq registers and length of memory
> + mapped region.
> +- mediatek,ext-irq-start: Identifies external irq start number in different
> + SOCs.

Wouldn't this always be 32 if the GIC is the parent? If 32 is the common
case, then use the SoC compatible to determine this value.

> +
> +Example:
> + cirq: interrupt-controller@10204000 {
> + compatible = "mediatek,mtk-cirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&sysirq>;
> + reg = <0 0x10204000 0 0x4000>;
> + mediatek,ext-irq-start = <32>;
> + };
> --
> 1.7.9.5
>

\
 
 \ /
  Last update: 2016-11-09 19:27    [W:0.189 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site