lkml.org 
[lkml]   [2016]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 01/10] Documentation: dt-bindings: Document STM32 ADC DT bindings
From
Date
On 10/31/2016 04:02 AM, Rob Herring wrote:
> On Tue, Oct 25, 2016 at 06:25:13PM +0200, Fabrice Gasnier wrote:
>> This patch adds documentation of device tree bindings for the STM32 ADC.
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
>> ---
>> .../devicetree/bindings/iio/adc/st,stm32-adc.txt | 78 ++++++++++++++++++++++
>> 1 file changed, 78 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> new file mode 100644
>> index 0000000..a9a8b3c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>> @@ -0,0 +1,78 @@
>> +STMicroelectronics STM32 ADC device driver
>> +
>> +STM32 ADC is a successive approximation analog-to-digital converter.
>> +It has several multiplexed input channels. Conversions can be performed
>> +in single, continuous, scan or discontinuous mode. Result of the ADC is
>> +stored in a left-aligned or right-aligned 32-bit data register.
>> +Conversions can be launched in software or using hardware triggers.
>> +
>> +The analog watchdog feature allows the application to detect if the input
>> +voltage goes beyond the user-defined, higher or lower thresholds.
>> +
>> +Each STM32 ADC block can have up to 3 ADC instances.
>> +
>> +Each instance supports two contexts to manage conversions, each one has its
>> +own configurable sequence and trigger:
>> +- regular conversion can be done in sequence, running in background
>> +- injected conversions have higher priority, and so have the ability to
>> + interrupt regular conversion sequence (either triggered in SW or HW).
>> + Regular sequence is resumed, in case it has been interrupted.
>> +
>> +Required properties:
>> +- compatible: Should be "st,stm32f4-adc".
>> +- reg: Offset and length of the ADC block register set.
>> +- interrupts: Must contain the interrupt for ADC.
>> +- clocks: Clock for the analog circuitry (common to all ADCs).
>> +- clock-names: Must be "adc".
>> +- vref-supply: Phandle to the vref input analog reference voltage.
>> +- #address-cells = <1>;
>> +- #size-cells = <0>;
>> +
>> +Optional properties:
>> +- A pinctrl state named "default" for each ADC channel may be defined to set
>> + inX ADC pins in mode of operation for analog input on external pin.
>> +- gpios: Array of gpios that may be configured as EXTi trigger sources.
>> +
>> +Example:
> This should be last.
Hi Rob,

I'll fix this.
>
>> + adc: adc@40012000 {
>> + compatible = "st,stm32f4-adc";
>> + reg = <0x40012000 0x400>;
>> + interrupts = <18>;
>> + clocks = <&rcc 0 168>;
>> + clock-names = "adc";
>> + vref-supply = <&reg_vref>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&adc3_in8_pin>;
>> + gpios = <&gpioa 11 0>,
>> + <&gpioa 15 0>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + adc1: adc1-master@0 {
> adc@0 sufficient?
Yes, if you agree, I'd go for adc1@0, adc2@100, adc3@200, to reflect reg
property for child node.
Is it ok from your point of view ?

>
>> + #io-channel-cells = <1>;
>> + reg = <0x0>;
>> + clocks = <&rcc 0 168>;
>> + st,adc-channels = <8>;
>> + };
>> + ...
>> + other adc child nodes follow...
>> + };
>> +
>> +Contents of a stm32 adc child node:
>> +-----------------------------------
>> +An ADC block node should contain at least one subnode, representing an
>> +ADC instance available on the machine.
>> +
>> +Required properties:
>> +- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
>> +- st,adc-channels: List of single-ended channels muxed for this ADC.
> How many? What are valid values?
stm32f4 can have up to 19 channels, numbered from 0 to 18 to match with
reference manual.
I'll add this.
>
>> +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
>> + Documentation/devicetree/bindings/iio/iio-bindings.txt
>> +
>> +Optional properties:
>> +- clocks: Input clock private to this ADC instance.
>> +- st,injected: Use injected conversion sequence on an ADC, rather than regular.
> Not sure about this one. Seems like this would either be a user choice
> or depend on what's connected to the ADC.
It's related to ADC sequencer, and the way it's being configured/used
(see above paragraph on regular/injected).
This is not related to what's connected to adc inputs.
As suggested by Jonathan, I think I'll drop injected support for now, to
simplify the driver and review.

Thanks,
Best Regards,
Fabrice
>
>> +- dmas: Phandle to dma channel for this ADC instance, only for regular
>> + conversions. See ../../dma/dma.txt for details.
>> +- dma-names: Must be "rx" when dmas property is being used.
>> --
>> 1.9.1
>>

\
 
 \ /
  Last update: 2016-11-03 12:13    [W:0.101 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site