lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: da850: specify the maximum bandwidth for tilcdc
From
Date
On Friday 25 November 2016 09:07 PM, Bartosz Golaszewski wrote:
> It has been determined that the maximum resolution supported correctly
> by tilcdc rev1 on da850 SoCs is 800x600@60. Due to memory throughput
> constraints we must filter out higher modes.
>
> Specify the max-bandwidth property for the display node for
> da850-based boards.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> arch/arm/boot/dts/da850.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 8e30d9b..9b7c444 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -452,6 +452,7 @@
> compatible = "ti,da850-tilcdc";
> reg = <0x213000 0x1000>;
> interrupts = <52>;
> + max-bandwidth = <28800000>;

If this is effectively the max pixel clock that the device supports,
then why not use the datasheet specified value of 37.5 MHz (Tc = 26.66 ns).

Thanks,
Sekhar

\
 
 \ /
  Last update: 2016-11-28 06:26    [W:0.039 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site