lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: touchscreen: w90p910 - change msleep to usleep_range for small msecs
Date
msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, retry logic, etc.
Thus, change msleep to usleep_range for precise wakeups.

Signed-off-by: Aniroop Mathur <a.mathur@samsung.com>
---
drivers/input/touchscreen/w90p910_ts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index da6004e..3f14b5a 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -171,9 +171,9 @@ static int w90p910_open(struct input_dev *dev)
clk_enable(w90p910_ts->clk);

__raw_writel(ADC_RST1, w90p910_ts->ts_reg);
- msleep(1);
+ usleep_range(1000, 1100);
__raw_writel(ADC_RST0, w90p910_ts->ts_reg);
- msleep(1);
+ usleep_range(1000, 1100);

/* set delay and screen type */
val = __raw_readl(w90p910_ts->ts_reg + 0x04);
--
2.6.2
\
 
 \ /
  Last update: 2016-11-28 19:33    [W:0.040 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site