lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] TI DA850/OMAP-L138/AM18x pinconf
Date
This series adds a new driver and DT bindings for TI DA850/OMAP-L138/AM18x
pinconf (bias pullup/pulldown).

The motivation for this series is LEGO MINDSTORMS EV3 support. It needs most,
if not all, internal pullup/down resistors disabled in order to work correctly.

v2 changes:
* s/DA8XX/DA850/ in the commit messages
* Fix `get_get` typo in pinctrl-da850-pupd.c
* Moved pin-controller@22c00c device node in da850.dtsi

David Lechner (3):
devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
ARM: dts: da850: Add node for pullup/pulldown pinconf

.../devicetree/bindings/pinctrl/ti,da850-pupd.txt | 55 ++++++
arch/arm/boot/dts/da850.dtsi | 5 +
drivers/pinctrl/Kconfig | 9 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-da850-pupd.c | 210 +++++++++++++++++++++
5 files changed, 280 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
create mode 100644 drivers/pinctrl/pinctrl-da850-pupd.c

--
2.7.4

\
 
 \ /
  Last update: 2016-11-28 17:42    [W:0.059 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site