lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v3 4/4] ARM64: dts: meson: odroidc2: disable advertisement EEE for GbE.
From
Date
On Mon, 2016-11-28 at 13:31 +0100, Andreas Färber wrote:
> Am 28.11.2016 um 10:46 schrieb Jerome Brunet:
> >
> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> > ---
> >  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 16
> > ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > index e6e3491d48a5..5624714d2b16 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > @@ -46,6 +46,7 @@
> >  
> >  #include "meson-gxbb.dtsi"
> >  #include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/net/mdio.h>
> >  
> >  / {
> >   compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
> > @@ -98,3 +99,18 @@
> >   pinctrl-0 = <&i2c_a_pins>;
> >   pinctrl-names = "default";
> >  };
> > +
> > +&ethmac {
> > + phy-handle = <&eth_phy0>;
> > +
> > + mdio {
> > + compatible = "snps,dwmac-mdio";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + eth_phy0: ethernet-phy@0 {
> > + reg = <0>;
> > + eee-broken-modes = <MDIO_EEE_1000T>;
> > + };
> > + };
> > +};
>
6I've tested this hand-applied because it applies to neither amlogic
> v4.10/integ nor linux-next.git and will conflict if applied through
> the
> net-next tree.

I've rebased on net-next this morning. I just checked again and now
there is a conflict indeed. Something got applied between in the last 6
ours which conflict with patch 4.

>
> Note that there already is an &ethmac node that you should be
> extending
> rather than duplicating:
>
> &ethmac {
> status = "okay";
> pinctrl-0 = <&eth_rgmii_pins>;
> pinctrl-names = "default";
> };
>
> If you or your colleagues could please fix the sort order of the
> nodes
> to be alphabetical again (ethmac after i2c_A here; between uart_A and
> ir
> in-tree) this wouldn't happen so easily again.

OK

>
> I therefore suggest to not apply this patch 4/4 through net-next but
> through the amlogic tree instead.

Agreed. The change is provided here so people can test.
If the other patches get accepted, I'll submit the dts change through
the amlogic tree.

>
> Thanks,
> Andreas
>

\
 
 \ /
  Last update: 2016-11-28 13:41    [W:0.034 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site