lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/5] thermal: rockchip: handle set_trips without the trip points
Date
In some cases, some sensors didn't need the trip points, the
set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm in the end,
ignore this case and disable the high temperature interrupt.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
---

Changes in v3:
- change the commit.
- Fixes something as Brian comments on

Changes in v2:
- Fixes something as Brian comments on
https://patchwork.kernel.org/patch/9440989.

Changes in v1: None

drivers/thermal/rockchip_thermal.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 660ed3b..56c663c 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -675,7 +675,21 @@ static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
int chn, void __iomem *regs, int temp)
{
- u32 alarm_value, int_en;
+ u32 alarm_value;
+ u32 int_en, int_clr;
+
+ /*
+ * In some cases, some sensors didn't need the trip points, the
+ * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm
+ * in the end, ignore this case and disable the high temperature
+ * interrupt.
+ */
+ if (temp == INT_MAX) {
+ int_clr = readl_relaxed(regs + TSADCV2_INT_EN);
+ int_clr &= ~TSADCV2_INT_SRC_EN(chn);
+ writel_relaxed(int_clr, regs + TSADCV2_INT_EN);
+ return 0;
+ }

/* Make sure the value is valid */
alarm_value = rk_tsadcv2_temp_to_code(table, temp);
--
2.7.4
\
 
 \ /
  Last update: 2016-11-28 12:13    [W:0.101 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site