lkml.org 
[lkml]   [2016]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/39] mtd: nand: denali: 2nd round of Denali NAND IP patch bomb
Date
As I said in the 1st round series, I am tackling on this driver
to use it for my SoCs.

The previous series was just cosmetic things, but this series
includes *real* changes.

After some more cleanups, I will start to add changes that
are really necessary.
One of the biggest problems I want to solve is a bunch of
hard-coded parameters that prevent me from using this driver for
my SoCs.

I will introduce capability flags that are associated with DT
compatible and make platform-dependent parameters overridable.

I still have lots of reworks to get done (so probably 3rd round
series will come), but I hope it is getting better and
I am showing a big picture now.



Masahiro Yamada (39):
mtd: nand: allow to set only one of ECC size and ECC strength from DT
mtd: nand: denali: remove unused CONFIG option and macros
mtd: nand: denali: remove redundant define of BANK(x)
mtd: nand: denali: remove more unused struct members
mtd: nand: denali: fix comment of denali_nand_info::flash_mem
mtd: nand: denali: fix write_oob_data() function
mtd: nand: denali: transfer OOB only when oob_required is set
mtd: nand: denali: introduce capability flag
mtd: nand: denali: fix erased page check code
mtd: nand: denali: remove redundant if conditional of erased_check
mtd: nand: denali: increment ecc_stats.failed by one per error
mtd: nand: denali: return 0 for uncorrectable ECC error
mtd: nand: denali: increment ecc_stats->corrected
mtd: nand: denali: replace uint{8/16/32}_t with u{8/16/32}
mtd: nand: denali: improve readability of handle_ecc()
mtd: nand: denali: rename handle_ecc() to denali_sw_ecc_fixup()
mtd: nand: denali: support HW_ECC_FIXUP capability
mtd: nand: denali: move denali_read_page_raw() above
denali_read_page()
mtd: nand: denali: perform erased check against raw transferred page
mtd: nand: denali_dt: enable HW_ECC_FIXUP capability for DT platform
mtd: nand: denali: support 64bit capable DMA engine
mtd: nand: denali_dt: remove dma-mask DT property
mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
mtd: nand: denali: add NEW_N_BANKS_FORMAT capability
mtd: nand: denali: use nand_chip to hold frequently accessed data
mtd: nand: denali: call nand_set_flash_node() to set DT node
mtd: nand: denali: do not set mtd->name
mtd: nand: denali: move multi NAND fixup code to a helper function
mtd: nand: denali: refactor multi NAND fixup code in more generic way
mtd: nand: denali: set DEVICES_CONNECTED 1 if not set
mtd: nand: denali: remove meaningless writes to read-only registers
mtd: nand: denali: remove unnecessary writes to ECC_CORRECTION
mtd: nand: denali: support 1024 byte ECC step size
mtd: nand: denali: fix the condition for 15 bit ECC strength
mtd: nand: denali: calculate ecc.strength and ecc.bytes generically
mtd: nand: denali: allow to use SoC-specific ECC strength
mtd: nand: denali: support "nand-ecc-strength" DT property
mtd: nand: denali: remove Toshiba, Hynix specific fixup code
mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants

.../devicetree/bindings/mtd/denali-nand.txt | 19 +-
drivers/mtd/nand/Kconfig | 11 -
drivers/mtd/nand/denali.c | 740 ++++++++++++---------
drivers/mtd/nand/denali.h | 84 +--
drivers/mtd/nand/denali_dt.c | 95 ++-
drivers/mtd/nand/denali_pci.c | 2 +
drivers/mtd/nand/nand_base.c | 6 -
7 files changed, 515 insertions(+), 442 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2016-11-26 19:13    [W:0.482 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site