lkml.org 
[lkml]   [2016]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_probe()
Dear Lee,

> On Tue, 08 Nov 2016, Lukasz Majewski wrote:
>
> > Dear All,
> >
> > > The commit a55944ca82d2 ("backlight: update bd state & fb_blank
> > > properties when necessary") has posed some extra restrictions on
> > > blanking and unblanking frame buffer device.
> > >
> > > Unfortunately, pwm_bl driver's probe did not initialize members of
> > > struct backlight_device necessary for further blank/unblank
> > > operation.
> > >
> > > This code in case of initial unblank of backlight device (default
> > > behaviour) sets use_count to 1 and marks this particular backlight
> > > device as used by all available fb devices (since it is not known
> > > during probe how much and which fb devices will be assigned).
> > >
> > > Without this code, the backlight works properly until one tries to
> > > blank it manually from sysfs with "echo 1
> > > > /sys/class/graphics/fb0/blank". Since fb_bl_on[0] and use_count
> > > > were both set to 0, the logic at
> > > fb_notifier_callback (@backlight.c) thought that we didn't turn on
> > > (unblanked) the backlight device and refuses to disable (blank)
> > > it. As a result we see garbage from fb displayed.
> >
> > COmments/acks are more than welcome :-)
>
> Ah, it looks like you dropped Jingoo from the list!
>

I can only apologize for such situation.... strange mistake.

> I'll reply to the original mail with him in CC.

Thank you for your help.

Best regards,
Lukasz Majewski

>
> > > Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> > > ---
> > > The patch has been tested on i.MX6q with 4.9-rc3
> > > SHA1: a909d3e636995ba7c349e2ca5dbb528154d4ac30
> > > ---
> > > Changes for v2:
> > > - Update commit message with proper other commit reference
> > >
> > > ---
> > > drivers/video/backlight/pwm_bl.c | 10 +++++++++-
> > > 1 file changed, 9 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/video/backlight/pwm_bl.c
> > > b/drivers/video/backlight/pwm_bl.c index 1261400..6859ba0 100644
> > > --- a/drivers/video/backlight/pwm_bl.c
> > > +++ b/drivers/video/backlight/pwm_bl.c
> > > @@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct
> > > platform_device *pdev) struct pwm_bl_data *pb;
> > > int initial_blank = FB_BLANK_UNBLANK;
> > > struct pwm_args pargs;
> > > - int ret;
> > > + int ret, i;
> > >
> > > if (!data) {
> > > ret = pwm_backlight_parse_dt(&pdev->dev,
> > > &defdata); @@ -348,6 +348,14 @@ static int
> > > pwm_backlight_probe(struct platform_device *pdev)
> > > bl->props.brightness = data->dft_brightness;
> > > bl->props.power = initial_blank;
> > > +
> > > + if (initial_blank == FB_BLANK_UNBLANK) {
> > > + for (i = 0; i < FB_MAX; i++)
> > > + bl->fb_bl_on[i] = true;
> > > +
> > > + bl->use_count = 1;
> > > + }
> > > +
> > > backlight_update_status(bl);
> > >
> > > platform_set_drvdata(pdev, bl);
> >
>
>
>

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-11 00:22    [W:0.081 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site