lkml.org 
[lkml]   [2016]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/6] add NS2 support to bgmac
From
Date
Hi Jon,

On 16-11-01 10:51 AM, Jon Mason wrote:
> Changes in v3:
> * Clean-up the bgmac DT binding doc (per Rob Herring)
> * Document the lane swap binding and make it generic (Per Andrew Lunn)
Where is the documentation of the lane swap binding?

>
>
> Changes in v2:
> * Remove the PHY power-on (per Andrew Lunn)
> * Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
> This results on none of the original PHY code from Vikas being
> present. So, I'm removing him as an author and giving him
> "Inspired-by" credit.
> * Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
> Fainelli)
> * Remove bgmac sleep (per Florian Fainelli)
> * Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
> * Rebased on latest net-next
> * Added patch for bcm54xx_auxctl_read, which is used in the BCM54810
>
>
> Add support for the amac found in the Broadcom Northstar2 SoC to the
> bgmac driver. This necessitates adding support to connect to an
> externally defined phy (as described in the device tree) in the driver.
> These phy changes are in addition to the changes necessary to get NS2
> working.
>
>
> Jon Mason (6):
> net: phy: broadcom: add bcm54xx_auxctl_read
> net: phy: broadcom: Add BCM54810 PHY entry
> Documentation: devicetree: net: add NS2 bindings to amac
> net: ethernet: bgmac: device tree phy enablement
> net: ethernet: bgmac: add NS2 support
> arm64: dts: NS2: add AMAC ethernet support
>
> .../devicetree/bindings/net/brcm,amac.txt | 16 ++--
> arch/arm64/boot/dts/broadcom/ns2-svk.dts | 5 ++
> arch/arm64/boot/dts/broadcom/ns2.dtsi | 12 +++
> drivers/net/ethernet/broadcom/bgmac-bcma.c | 48 ++++++++++
> drivers/net/ethernet/broadcom/bgmac-platform.c | 100 ++++++++++++++++++++-
> drivers/net/ethernet/broadcom/bgmac.c | 55 ++----------
> drivers/net/ethernet/broadcom/bgmac.h | 8 ++
> drivers/net/phy/Kconfig | 2 +-
> drivers/net/phy/broadcom.c | 68 +++++++++++++-
> include/linux/brcmphy.h | 11 +++
> 10 files changed, 268 insertions(+), 57 deletions(-)
>

\
 
 \ /
  Last update: 2016-11-01 19:01    [W:0.071 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site