lkml.org 
[lkml]   [2016]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
Date
Stefan Wahren <stefan.wahren@i2se.com> writes:

>> Eric Anholt <eric@anholt.net> hat am 31. Oktober 2016 um 18:53 geschrieben:
>>
>>
>> Stefan Wahren <stefan.wahren@i2se.com> writes:
>>
>> > Hi Eric,
>> >
>> >> Eric Anholt <eric@anholt.net> hat am 27. Oktober 2016 um 18:52 geschrieben:
>> >>
>> >>
>> >> From: Linus Walleij <linus.walleij@linaro.org>
>> >>
>> >> The idea is to give useful names to GPIO lines that an implementer
>> >> will be using from userspace, e.g. for maker type projects. These are
>> >> user-visible using tools/gpio/lsgpio.c
>> >
>> > sorry for the late feedback, but did you check your patch against the
>> > Firmware
>> > DTS [1]?
>> >
>> > As an example the GPIO38 is connected and named as USB_LIMIT_1A2 since
>> > Raspberry
>> > Pi 1 B Plus.
>> >
>> > [1] -
>> > https://github.com/raspberrypi/documentation/blob/master/configuration/images/dt-blob.dts
>>
>> I did use the dt-blob sometimes for cross-checking, but these are
>> written against the schematics, not the dt-blob. If you've got things
>> you'd like changed, could you send a patch?
>
> A patch against your v3 or my own v4 based on your patch?

A followon patch is great, then the changes are obvious and we can
either squash or commit as appropriate.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-01 17:16    [W:0.142 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site