Messages in this thread Patch in this message |  | | From | Peter Ujfalusi <> | Subject | [PATCH v3 2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state | Date | Tue, 1 Nov 2016 14:59:33 +0200 |
| |
If the pwm is not enabled the backlight initially should not be enabled either if we have booted with DT and there is a phandle pointing to the backlight node.
The patch extends the checks to decide if we should keep the backlight off initially.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- drivers/video/backlight/pwm_bl.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 4b07da278b4f..f680f7b033b2 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -215,6 +215,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) if (!regulator_is_enabled(pb->power_supply)) return FB_BLANK_POWERDOWN; + /* The pwm is disabled, keep it like this */ + if (!pwm_is_enabled(pb->pwm)) + return FB_BLANK_POWERDOWN; + return FB_BLANK_UNBLANK; } -- 2.10.2
|  |