[lkml]   [2016]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/4] add support for impedance control for TI dp83867 phy and fix 2nd ethernet on dra72 rev C evm
Add support for configurable impedance control for TI dp83867
phy via devicetree. More documentation in [1].
CPSW second ethernet is not working, fix it by enabling
impedance configuration on the phy.

Verified the patch on DRA72 Rev C evm, logs at [2]. Also pushed
a branch [3] for others to test.

Changes from initial version:
* As per Sekhar's comment, instead of passing impedance values,
change to max and min impedance from DT
* Adopted phy_read_mmd_indirect() to cunnrent implementation.
* Corrected the phy delay timings to the optimal value.

[1] -
[2] -
[3] - git:// dp83867-v2

Mugunthan V N (4):
net: phy: dp83867: Add documentation for optional impedance control
net: phy: dp83867: add support for MAC impedance configuration
ARM: dts: dra72-evm-revc: fix correct phy delay and impedance settings
ARM: dts: dra72-evm-revc: fix correct phy delay

.../devicetree/bindings/net/ti,dp83867.txt | 12 ++++++++++
arch/arm/boot/dts/dra72-evm-revc.dts | 10 ++++----
drivers/net/phy/dp83867.c | 28 ++++++++++++++++++++++
3 files changed, 46 insertions(+), 4 deletions(-)


 \ /
  Last update: 2016-10-04 14:58    [W:0.075 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site