lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
On Wed, Oct 26, 2016 at 04:32:28PM -0700, Michael Scott wrote:
> Initial pinctrl driver for QCOM msm8994 platforms.
>
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
> a proper pinctrl driver in place.
>
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART. Beyond the first few pins the rest are different enough to justify
> it's own driver.
>
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
>
> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
> by Björn Andersson <bjorn.andersson@linaro.org>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
> Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
>
> Signed-off-by: Michael Scott <michael.scott@linaro.org>
> ---
>
> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups
>
> .../bindings/pinctrl/qcom,msm8994-pinctrl.txt | 175 +++

Acked-by: Rob Herring <robh@kernel.org>

> drivers/pinctrl/qcom/Kconfig | 9 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-msm8994.c | 1400 ++++++++++++++++++++
> 4 files changed, 1585 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8994.c

\
 
 \ /
  Last update: 2016-10-31 05:42    [W:0.063 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site