lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 11/11] net: dsa: mv88e6xxx: setup port's MAC
Date
Now that we have setters to configure the port's MAC, use them to
refactor the port setup and adjust_link code.

Note that port's MAC speed, duplex or RGMII delay must not be changed
unless the port's link is forced down. So wrap all that in a
mv88e6xxx_port_ctrl_mac function.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 138 ++++++++++++++++-----------------------
1 file changed, 58 insertions(+), 80 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 23c05e3..56d60fd 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -701,6 +701,47 @@ static bool mv88e6xxx_6352_family(struct mv88e6xxx_chip *chip)
return chip->info->family == MV88E6XXX_FAMILY_6352;
}

+static int mv88e6xxx_port_ctrl_mac(struct mv88e6xxx_chip *chip, int port,
+ int link, int speed, int duplex,
+ phy_interface_t mode)
+{
+ int err;
+
+ if (!chip->info->ops->port_set_link)
+ return 0;
+
+ /* Port's MAC control must not be changed unless the link is down */
+ err = chip->info->ops->port_set_link(chip, port, 0);
+ if (err)
+ return err;
+
+ if (chip->info->ops->port_set_speed) {
+ err = chip->info->ops->port_set_speed(chip, port, speed);
+ if (err && err != -EOPNOTSUPP)
+ goto restore_link;
+ }
+
+ if (chip->info->ops->port_set_duplex) {
+ err = chip->info->ops->port_set_duplex(chip, port, duplex);
+ if (err && err != -EOPNOTSUPP)
+ goto restore_link;
+ }
+
+ if (chip->info->ops->port_set_rgmii_delay) {
+ err = chip->info->ops->port_set_rgmii_delay(chip, port, mode);
+ if (err && err != -EOPNOTSUPP)
+ goto restore_link;
+ }
+
+ err = 0;
+restore_link:
+ if (chip->info->ops->port_set_link(chip, port, link))
+ netdev_err(chip->ds->ports[port].netdev,
+ "failed to restore MAC's link\n");
+
+ return err;
+}
+
/* We expect the switch to perform auto negotiation if there is a real
* phy. However, in the case of a fixed link phy, we force the port
* settings from the fixed link settings.
@@ -709,64 +750,18 @@ static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct mv88e6xxx_chip *chip = ds->priv;
- u16 reg;
int err;

if (!phy_is_pseudo_fixed_link(phydev))
return;

mutex_lock(&chip->reg_lock);
-
- err = mv88e6xxx_port_read(chip, port, PORT_PCS_CTRL, &reg);
- if (err)
- goto out;
-
- reg &= ~(PORT_PCS_CTRL_LINK_UP |
- PORT_PCS_CTRL_FORCE_LINK |
- PORT_PCS_CTRL_DUPLEX_FULL |
- PORT_PCS_CTRL_FORCE_DUPLEX |
- PORT_PCS_CTRL_SPEED_UNFORCED);
-
- reg |= PORT_PCS_CTRL_FORCE_LINK;
- if (phydev->link)
- reg |= PORT_PCS_CTRL_LINK_UP;
-
- if (mv88e6xxx_6065_family(chip) && phydev->speed > SPEED_100)
- goto out;
-
- switch (phydev->speed) {
- case SPEED_1000:
- reg |= PORT_PCS_CTRL_SPEED_1000;
- break;
- case SPEED_100:
- reg |= PORT_PCS_CTRL_SPEED_100;
- break;
- case SPEED_10:
- reg |= PORT_PCS_CTRL_SPEED_10;
- break;
- default:
- pr_info("Unknown speed");
- goto out;
- }
-
- reg |= PORT_PCS_CTRL_FORCE_DUPLEX;
- if (phydev->duplex == DUPLEX_FULL)
- reg |= PORT_PCS_CTRL_DUPLEX_FULL;
-
- if ((mv88e6xxx_6352_family(chip) || mv88e6xxx_6351_family(chip)) &&
- (port >= mv88e6xxx_num_ports(chip) - 2)) {
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
- reg |= PORT_PCS_CTRL_RGMII_DELAY_RXCLK;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
- reg |= PORT_PCS_CTRL_RGMII_DELAY_TXCLK;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
- reg |= (PORT_PCS_CTRL_RGMII_DELAY_RXCLK |
- PORT_PCS_CTRL_RGMII_DELAY_TXCLK);
- }
- mv88e6xxx_port_write(chip, port, PORT_PCS_CTRL, reg);
-
-out:
+ err = mv88e6xxx_port_ctrl_mac(chip, port, phydev->link, phydev->speed,
+ phydev->duplex, phydev->interface);
mutex_unlock(&chip->reg_lock);
+
+ if (err && err != -EOPNOTSUPP)
+ netdev_err(ds->ports[port].netdev, "failed to configure MAC\n");
}

static int _mv88e6xxx_stats_wait(struct mv88e6xxx_chip *chip)
@@ -2409,35 +2404,18 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
int err;
u16 reg;

- if (mv88e6xxx_6352_family(chip) || mv88e6xxx_6351_family(chip) ||
- mv88e6xxx_6165_family(chip) || mv88e6xxx_6097_family(chip) ||
- mv88e6xxx_6185_family(chip) || mv88e6xxx_6095_family(chip) ||
- mv88e6xxx_6065_family(chip) || mv88e6xxx_6320_family(chip)) {
- /* MAC Forcing register: don't force link, speed,
- * duplex or flow control state to any particular
- * values on physical ports, but force the CPU port
- * and all DSA ports to their maximum bandwidth and
- * full duplex.
- */
- err = mv88e6xxx_port_read(chip, port, PORT_PCS_CTRL, &reg);
- if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
- reg &= ~PORT_PCS_CTRL_SPEED_UNFORCED;
- reg |= PORT_PCS_CTRL_FORCE_LINK |
- PORT_PCS_CTRL_LINK_UP |
- PORT_PCS_CTRL_DUPLEX_FULL |
- PORT_PCS_CTRL_FORCE_DUPLEX;
- if (mv88e6xxx_6065_family(chip))
- reg |= PORT_PCS_CTRL_SPEED_100;
- else
- reg |= PORT_PCS_CTRL_SPEED_1000;
- } else {
- reg |= PORT_PCS_CTRL_SPEED_UNFORCED;
- }
-
- err = mv88e6xxx_port_write(chip, port, PORT_PCS_CTRL, reg);
- if (err)
- return err;
- }
+ /* MAC Forcing register: don't force link, speed, duplex or flow control
+ * state to any particular values on physical ports, but force the CPU
+ * port and all DSA ports to their maximum bandwidth and full duplex.
+ */
+ if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port))
+ err = mv88e6xxx_port_ctrl_mac(chip, port, 1, SPEED_MAX,
+ DUPLEX_FULL, 0);
+ else
+ err = mv88e6xxx_port_ctrl_mac(chip, port, LINK_UNKNOWN,
+ SPEED_UNKNOWN, DUPLEX_UNKNOWN, 0);
+ if (err)
+ return err;

/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
--
2.10.2
\
 
 \ /
  Last update: 2016-11-01 04:27    [W:0.198 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site