lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/6] Documentation: devicetree: net: add NS2 bindings to amac
On Fri, Oct 28, 2016 at 04:56:56PM -0400, Jon Mason wrote:
> Signed-off-by: Jon Mason <jon.mason@broadcom.com>
> ---
> Documentation/devicetree/bindings/net/brcm,amac.txt | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
> index ba5ecc1..f2b194e 100644
> --- a/Documentation/devicetree/bindings/net/brcm,amac.txt
> +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt
> @@ -2,11 +2,12 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings
> -------------------------------------------------------------
>
> Required properties:
> - - compatible: "brcm,amac" or "brcm,nsp-amac"
> + - compatible: "brcm,amac", "brcm,nsp-amac", or "brcm,ns2-amac"

One per line is preferred.

> - reg: Address and length of the GMAC registers,
> Address and length of the GMAC IDM registers
> + Address and length of the NIC Port Manager registers (optional)
> - reg-names: Names of the registers. Must have both "amac_base" and
> - "idm_base"
> + "idm_base". "nicpm_base" is optional (required for NS2)

Is nicpm_base optional on some SoCs? If not just say which ones it
applies to. A separate line will make that clearer.

_base is kind of redundant too, but it's already done.

> - interrupts: Interrupt number
>
> Optional properties:
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2016-10-31 07:22    [W:0.059 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site