Messages in this thread |  | | From | Chen-Yu Tsai <> | Subject | [PATCH v3 0/2] ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge | Date | Sat, 29 Oct 2016 19:06:09 +0800 |
| |
Hi,
This is v3 of my sun6i DRM/KMS display enablement series. Most of the patches in v2 were merged, leaving only the dumb-vga-dac patch and the hummingbird-a31 VGA output patch.
A few things were changed, mainly the DAC enable method from a GPIO to a regulator supply.
Changes since v2:
- Changed the enable-gpio of dumb-vga-dac to vdd-supply regulator. This better matches the hardware that I have: the DAC has a fixed regulator dropping the voltage from the board-wide 5V to 3.3V the DAC uses. The regulator is controlled through a GPIO pin.
- Renamed the node of the VGA connector from "vga" to "vga-connector".
- Renamed the node of the VGA DAC from "bridge" to "vga-dac".
Regards ChenYu
Chen-Yu Tsai (2): drm/bridge: dumb-vga-dac: Support a VDD regulator supply ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge
.../bindings/display/bridge/dumb-vga-dac.txt | 2 + arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 76 ++++++++++++++++++++++ drivers/gpu/drm/bridge/dumb-vga-dac.c | 35 ++++++++++ 3 files changed, 113 insertions(+)
-- 2.9.3
|  |