Messages in this thread Patch in this message |  | | From | Peter Rosin <> | Subject | [PATCH] regulator: pwm: fix syntax errors in the examples | Date | Sat, 15 Oct 2016 14:29:13 +0200 |
| |
While at it, clean up some other things as well.
Signed-off-by: Peter Rosin <peda@axentia.se> --- .../devicetree/bindings/regulator/pwm-regulator.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index 3aeba9f86ed8..6d98fbaeb506 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -55,11 +55,11 @@ Optional properties: - enable-gpios: GPIO to use to enable/disable the regulator Any property defined as part of the core regulator binding can also be used. -(See: ../regulator/regulator.txt) +(See: regulator.txt) Continuous Voltage With Enable GPIO Example: - pwm_regulator { - compatible = "pwm-regulator; + pwm-regulator { + compatible = "pwm-regulator"; pwms = <&pwm1 0 8448 0>; enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1016000>; @@ -71,12 +71,12 @@ Continuous Voltage With Enable GPIO Example: * Inverted PWM logic, and the duty cycle range is limited * to 30%-70%. */ - pwm-dutycycle-range <700 300>; /* */ + pwm-dutycycle-range <700 300>; }; Voltage Table Example: - pwm_regulator { - compatible = "pwm-regulator; + pwm-regulator { + compatible = "pwm-regulator"; pwms = <&pwm1 0 8448 0>; regulator-min-microvolt = <1016000>; regulator-max-microvolt = <1114000>; -- 2.1.4
|  |