lkml.org 
[lkml]   [2016]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-sunxi] [PATCH 2/5] pwm: sun4i: Add support for PWM controller on sun6i SoCs
On Wed, Oct 12, 2016 at 03:30:07PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Wed, Oct 12, 2016 at 12:20 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
> > The PWM controller in A31 is different with other Allwinner SoCs, with a
> > control register per channel (in other SoCs the control register is
> > shared), and each channel are allocated 16 bytes of address (but only 8
> > bytes are used.). The register map in one channel is just like a
> > single-channel A10 PWM controller, however, A31 have a different
> > prescaler table than other SoCs.
> >
> > In order to use the driver for all 4 channels, device nodes should be
> > created per channel.
>
> I think Maxime wants you to support the different register offsets
> in this driver, and have all 4 channels in the same device (node).

Indeed.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-10-14 15:36    [W:0.058 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site