[lkml]   [2016]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/6] Make pxa core clocks settable
This serie is two fold:
- a set of fixes, patches 1 to 4
- a patch with transfers most of core clock handling from pxa2xx-cpufreq into
clk-pxa*, ie. patch 5
This is the main change, and is providing control over CPU clocks for both
pxa25x and pxa27x through the clock API.

- a last patch (patch 6), which is not to be taken right away, just reviewed,
and which simplifies pxa2xx-cpufreq by removing everything clock related.
This one relies on the former one, but is not necessarily to be taken in the
same cycle, as the cpufreq will continue to work with the former cpufreq
driver even if the clock changes are in.

The patches have been tested on lubbock (pxa25x) and mainstone (pxa27x) boards,
with a cpu-burn and different scaling max frequencies.

Happy review.


Robert Jarzmik (6):
clk: pxa: remove unused variables
clk: pxa: core pll is not affected by t bit
clk: pxa: b bit of clkcfg means fast bus
clk: pxa: export core clocks
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq
cpufreq: pxa: convert to clock API

drivers/clk/pxa/clk-pxa.c | 128 ++++++++++++++++++++++++++
drivers/clk/pxa/clk-pxa.h | 56 +++++++++++-
drivers/clk/pxa/clk-pxa25x.c | 107 +++++++++++++++++++---
drivers/clk/pxa/clk-pxa27x.c | 168 +++++++++++++++++++++++++++-------
drivers/cpufreq/pxa2xx-cpufreq.c | 191 ++++++++-------------------------------
5 files changed, 453 insertions(+), 197 deletions(-)


 \ /
  Last update: 2016-10-10 22:10    [W:0.104 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site